SV3-10-C-6H-24DG

The SV3-10-C-6H-24DG solenoid valve belongs to the Solenoid Valves series produced by Vickers and serves as an on-off element in hydraulic automation circuits. It is electrically operated so actuation is achieved by a coil rather than by fluid pressure or mechanical linkage. The coil is designed for 24 VDC, which matches common mobile and industrial control power supplies. A DIN 43650-A connector terminates the coil to provide a quick-plug electrical interface. There is no suppression diode inside the coil, so external surge protection must be provided when sensitive electronics share the supply. The valve is supplied without a manual override, preventing local hand actuation during energized service. It installs as a screw-in cartridge, seating directly into a C-10-2 cavity to simplify manifold assembly. A maximum working pressure of 210 bar defines the allowable system loading before fatigue or leakage become concerns.

Flow and port geometry are arranged for straightforward integration with SAE plumbing. Two valve ports handle the inlet and outlet path, while the housing itself also contains two ports, maintaining a simple inline configuration. Both ports are sized to #6 SAE threads, enabling direct connection to hoses or tubes of the same designation without adapters. The general port type follows the SAE standard so existing manifold blocks with SAE passages can receive the unit. Under stable conditions the valve supports a rated flow of 45 l/min, allowing moderate actuator speeds in compact power units. Internal fit and seal quality limit leakage to 5 drops per minute at the rated pressure, keeping standby energy losses low. Together these capacities allow the SV3-10-C-6H-24DG to switch hydraulic flow reliably while occupying minimal space and requiring only electrical signals for control.