Vickers | SV13-12V-0-0-00
SV13-12V-0-0-00
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SV13-12V-0-0-00 valve is produced by Vickers within the Solenoid Valves series and serves as an on-off element for hydraulic automation circuits. It uses a 2-way, 2-position pilot-operated poppet design to block or pass flow on command. A rated flow capacity of 114 l/min (30 US gpm) allows it to support medium to high volume lines, while the 350 bar (5000 psi) rated pressure establishes the maximum operating limit for the poppet and housing. The 1.062-12 UN thread size lets the valve screw into standard cavities, and a body diameter of 38.9 mm aligns the sleeve with the bore for proper sealing. A nose diameter of 23.77 mm centers the pilot section, and the main hex dimension of 31.75 mm provides the primary wrench surface for tightening during installation. A secondary hex of 22.2 mm is included to hold the valve body when torque is applied, and an overall length of 60.3 mm determines the cavity depth required in the manifold.
Electrical actuation is defined by the H-series coil platform from the 10 series, and the valve draws 29 W when that coil is energized to shift the poppet. Because no coil is supplied under code 00, the installer must select the appropriate voltage coil separately; once fitted, the coil nut is tightened to 5–8 Nm (4–6 ft-lb) to secure it against vibration. Viton sealing is used to resist petroleum-based fluids and elevated temperatures, maintaining integrity under continuous duty. Internal leakage is limited to 5 drops per minute when the valve is held at maximum pressure, supporting standby efficiency goals. The assembled unit weighs 0.27 kg (0.59 lb), easing manual installation in dense manifolds and mobile equipment.
Technical Specifications
Body Diameter
38.9 mm (1.53 in)
Coil Nut Torque
5–8 Nm (4–6 ft-lb)
Coil Power
29 W
Coil Series
H (10 Series)
Coil Supplied
None (Code 00)
Leakage At Rated Pressure
5 drops/min @ 350 bar
Main Hex Size
31.75 mm (1.250 in)
Nose Diameter
23.77 mm (0.936 in)
Overall Length
60.3 mm (2.37 in)
Rated Flow
114 l/min (30 US gpm)
Rated Pressure
350 bar (5000 psi)
Seal Material
Viton
Secondary Hex Size
22.2 mm (0.875 in)
Thread Size
1.062-12 UN
Valve Configuration
2-Way, 2-Position Poppet (Pilot-Op.)
Weight
0.27 kg (0.59 lb)
1620 Old Apex Road
Shipping & Payment Options
