SV1-16-C-12T-115AG

The SV1-16-C-12T-115AG solenoid valve is produced by Vickers within the Solenoid Valves series and is intended to provide on-off flow control in hydraulic manifolds. It uses a 2-way, 2-position poppet design that remains normally closed, so flow is blocked until the coil is energized. Two valve ports support simple in-line installation while a rated capacity of 35 gpm maintains adequate flow for medium-size circuits. A pressure limit of 3,000 psi allows the valve to operate in high-pressure mobile and industrial systems. The screw-in cartridge format fits the common C-16-2 cavity, giving designers flexibility to incorporate the valve in aluminum or steel blocks. A 3/4-inch SAE port interface matches typical manifold tooling, and a cleanliness target of 18/16/13 helps prevent poppet damage and leakage. Electrical actuation is handled through a DIN 43650 coil connector, which speeds replacement and simplifies wiring during maintenance.

The coil is wound for 115-volt AC service, letting the valve tie directly to standard plant power without a separate direct-current supply. Buna-N seals resist petroleum-based hydraulic oils and support consistent leakage control over the valve’s working range. Overall dimensions of 3.500 inches in length, 2.500 inches in width, and 6.000 inches in height allow the component to fit compactly inside stacked manifolds or tight power unit envelopes. The cartridge body accepts installation torque appropriate for the specified cavity, and the two-port architecture minimizes passage drilling in custom blocks. With an internal poppet that moves between two stable positions, the valve switches flow reliably whenever the coil is energized or de-energized. Maintaining the recommended filtration level safeguards the poppet seat, while the cartridge style makes replacement straightforward if contamination does occur.