1-888-551-3082 | 1-919-443-0207 | sales@hydraulicpartsusa.com

Vickers | SM42020762001510

SM420(20)76200/1510

Request a Quote

  Call For Quote
Repair Options Available
Worldwide Delivery
1-Year Warranty

What Happens Next?

1
Email Confirmation

You will get an email confirming we have received your inquiry.

2
Dedicated Account Manager

A team member will review your request and be in touch concerning any questions or specifications.

3
Quote Delivered

You will receive a comprehensive quote tailored to your specific needs.

The SM420(20)76200/1510 servo valve is produced by Vickers for the Servo Valves series and is used to meter hydraulic flow in automated motion loops. It delivers a rated flow of 76 l/min (20 US gpm) at a 70 bar pressure drop, supplying the volume needed for mid-size cylinders while maintaining predictable pressure loss. A rated current of 15 mA drives the torque motor so control electronics can operate with low power stages. Coil resistance is 200 Ω at 21 °C, a value that limits heat rise and assists in fault detection for open or short circuits. Command polarity is defined so that a positive A or C signal sends flow to port B, simplifying setup during commissioning. Electrical connection is made through an MS-3106-14S-2S four-pin plug, giving a sealed and vibration-resistant interface common to industrial and military environments.

The valve body is 99.314 mm long, 71.882 mm high, and 86.868 mm wide, allowing it to fit compactly on standardized manifolds. A port circle diameter of 22.2 mm aligns the mounting holes with typical sub-plate layouts for consistent bolt spacing. Each working port seals with an O-ring that has a 1.78 mm cross section and a 10.82 mm inside diameter, preventing external leakage under dynamic pressure cycles. Together, these dimensional details support straightforward installation, reliable sealing, and space-efficient packaging inside hydraulic automation assemblies.

Technical Specifications

Coil Resistance
200 Ω (21 C)

Electrical Connector
MS-3106-14S-2S (4 pin)

Port Circle Diameter
22.2 mm (0.875 in)

Port O-ring Cross Section
1.78 mm (0.070 in)

Port O-ring Inside Diameter
10.82 mm (0.426 in)

Product Height
71.882 mm (2.830 in)

Product Length
99.314 mm (3.910 in)

Product Width
86.868 mm (3.420 in)

Rated Current
15 mA

Rated Flow (70 Bar Δp)
76 l/min (20 USgpm)

Signal Polarity
+A or C Causes Flow To Port B

address-icon
1620 Old Apex Road
Cary, NC 27513, USA
phone-icon
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
To Speak to a sales representative for pricing & lead time
International

1-919-443-0207

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Hydraulic Parts USA warranty on ALL products

We are a Better Business Bureau A+ business