TCG62-06-FV-C-P2-T

The TCG62-06-FV-C-P2-T relief valve belongs to the Relief Valves series from Vickers and is intended for hydraulic automation circuits that require stable pressure limitation and unloading. It is a size 06 unit that supports a main valve adjustable up to 21 MPa so users can set a precise system limit. The internal pressure control follows a 2-pressure plus unload scheme, allowing the valve to switch between two preset levels and open for tank return when unloading is required. A high vent pressure setting identified by the V code lets a remote pilot line trigger rapid unloading without false trips. The C-side remote line can reach 14 MPa, providing an intermediate reference for pressure shifts when the system operates in multi-pressure modes.

The housing tolerates a maximum working pressure of 21 MPa, matching the adjustable limit and preventing case deformation during peak load cycles. Gasket mounting simplifies installation on manifold faces and keeps envelope height low. An internal drain path eliminates the need for an external drain hose, reducing plumbing complexity. The flow range spans from a minimum of 5 L/min for reliable response at low demand to a maximum of 80 L/min for medium-capacity circuits, covering common pump sizes used with size 06 hardware. The assembly weighs 10.9 kg, which allows manual handling during maintenance while still offering the mass needed for vibration damping.