Vickers | PVM131ER13GS02AAA2300000AA0A
PVM131ER13GS02AAA2300000AA0A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVM131ER13GS02AAA2300000AA0A piston pump belongs to the PVM Code A Piston Pumps series and is produced by Vickers for hydraulic automation where variable displacement and pressure control are required. It displaces 131.1 cm³ per revolution, allowing the circuit designer to size reservoirs and actuators accurately. At its rated speed it provides a theoretical flow of 215 l/min so systems can achieve steady motion without auxiliary boosters. The pump accepts an input speed up to 2000 RPM, matching typical industrial prime movers. A nominal pressure rating of 315 bar supports continuous operation, while a peak rating of 350 bar covers short overloads caused by rapid load changes. The compensator is preset at 230 bar, which lets the unit reduce swash-plate angle automatically when the load reaches that pressure limit. Mechanical mounting is handled by an SAE J744-127-4 (C, 4-bolt) flange, and drive torque is transmitted through an SAE J744-44-1 straight-keyed shaft so alignment with standard couplings is straightforward.
The pump draws no more than 113 kW from the prime mover, which helps users select suitable electric motors or diesel engines. Up to 596 Nm of input torque can be applied without risk of shaft damage during cold starts or pressure spikes. Cold start events are allowed down to 104 °C fluid temperature, preventing thermal shock when oil is still hot from previous duty cycles. Cleanliness of the working fluid must meet ISO 18/13 to avoid premature wear of the cylinder block and shoe plates. Efficient lubrication is supported when oil viscosity stays between 16 cSt and 40 cSt; the lower limit maintains hydrodynamic film strength, while the upper limit controls internal heating and power loss. Acoustic output is specified at 79 dB, guiding enclosure design where noise exposure is regulated. The complete assembly weighs 145 lb, so lifting provisions should be sized for that mass during installation and maintenance.
Technical Specifications
Cold Start Temperature Limit
104 °C
Displacement
131.1 cm³/rev
Fluid Cleanliness
ISO 18/13
Input Mounting Flange
SAE J744-127-4 (C, 4-Bolt)
Input Shaft
SAE J744-44-1, SAE D, Straight Keyed
Input Speed (maximum)
2000 RPM
Maximum Input Power
113 kW
Maximum Input Torque
596 Nm
Maximum Recommended Oil Viscosity
40 cSt
Minimum Recommended Oil Viscosity
16 cSt
Noise
79 dB
Nominal Pressure Rating
315 bar
Peak Pressure Rating
350 bar
Pressure Compensator Setting
230 bar
Product Weight
145 lb
Theoretical Flow At Rated Speed
215 l/min
1620 Old Apex Road
Shipping & Payment Options
