Vickers | PVM106ER10GS02AAE0020000EA0A
PVM106ER10GS02AAE0020000EA0A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVM106ER10GS02AAE0020000EA0A variable displacement axial piston pump is manufactured by Vickers within the PVM Code A Piston Pumps series. Intended for hydraulic automation, it delivers controlled oil flow while holding system pressure. The geometric displacement is 106.5 cm³ per revolution, establishing the volume moved each cycle. A nominal pressure rating of 230 bar covers continuous duty, and a peak pressure limit of 280 bar tolerates short transients. The differential pressure setting is 20 bar, providing the internal control margin for the compensator. A maximum speed of 1800 r/min defines the mechanical ceiling, and at that speed under 280 bar the unit supplies up to 187 l/min. Clockwise rotation matches right-hand prime movers, and an SAE C 4-bolt J744-127-4 mounting flange aligns with standard power-takeoff pads.
Fluid interfaces use SAE J518 flange ports arranged on the side of the housing to streamline pipe runs. The inlet flange is 2.5 in to minimize suction losses, whereas the outlet flange is 1.0 in for the pressurized discharge line. Power is transmitted through an SAE C-C straight keyed input shaft conforming to J744-38-1, and a thru-drive provision with an SAE C 2- or 4-bolt 14-tooth spline allows an additional pump to share the same driver. Dynamic control is aided by a 90 ms on-stroke response when flow is demanded and a 25 ms off-stroke response when flow is reduced. These response times enable precise pressure regulation in automated hydraulic circuits.
Technical Specifications
Differential Pressure Setting
20 bar
Geometric Displacement
106.5 cm3/rev
Inlet Port Size (flange)
2.5 in
Input Shaft
SAE C-C Straight Keyed (J744-38-1)
Main Port Location
Side
Max Flow @1800 R/min (280 Bar)
187 l/min
Max Speed
1800 r/min
Mounting Flange
SAE C 4-Bolt (J744-127-4)
Nominal Pressure
230 bar
Outlet Port Size (flange)
1.0 in
Peak Pressure
280 bar
Port Type
SAE J518 Flange Ports
Response Time (off Stroke)
25 ms
Response Time (on Stroke)
90 ms
Rotation
Clockwise (Right-Hand)
Thru-drive Mount
SAE C 2-/4-Bolt 14T Spline
1620 Old Apex Road
Shipping & Payment Options
