Vickers | PVM098ER10GS02AAC2811000-CA0A
PVM098ER10GS02AAC2811000 CA0A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVM098ER10GS02AAC2811000 CA0A is a variable-displacement piston pump produced by Vickers for the PVM Code A Piston Pumps series. Designed to supply hydraulic power in automated machinery, it delivers 98.3 cm³ of fluid each revolution so output volume scales directly with speed. A SAE C four-bolt mounting flange allows straightforward attachment to standard engine or motor pads, while the 38.10 mm shaft diameter with a 9.52 mm key transmits drive torque without slippage. The pump’s moment of inertia of 131.6 kg-cm² influences the startup torque demanded of the prime mover, and a dry weight of 55 kg must be supported by the mounting structure. Continuous operation is permitted up to 1800 r/min, giving designers a clear upper limit when selecting pulley ratios or direct couplings.
Under rated flow conditions, the pump supplies 170 L/min at 280 bar, so circuit designers can size valves and actuators accordingly. Driving it at that point requires up to 88 kW, establishing the motor horsepower that must be installed. The unit can withstand continuous system pressures of 315 bar and short peaks to 350 bar, enabling use in high-demand industrial presses or injection equipment. A maximum shaft torque rating of 765 Nm prevents mechanical overload when extreme loads are imposed, while the running torque of 464 Nm at 280 bar represents the typical load seen during normal duty. These limits define coupling, key, and bearing selections and help ensure that the hydraulic transmission remains reliable over extended operating cycles.
Technical Specifications
Geometric Displacement
98.3 cm3/rev (6.00 in3/rev)
Key Width
9.52 mm (.375 in)
Max Flow @ 1800 R/min (280 Bar)
170 L/min (45 USgpm)
Max Input Power @ 1800 R/min (280 Bar)
88 kW (118 hp)
Max Operating Speed
1800 r/min
Max Shaft Torque
765 Nm (6770 lb-in)
Max Torque @ 280 Bar
464 Nm (342 lb-ft)
Maximum Pressure
315 bar (4568 psi)
Moment Of Inertia
131.6 kg-cm2
Mounting Flange
SAE C, 4-bolt (Code G)
Peak Pressure
350 bar (5000 psi)
Shaft Diameter
38.10 mm (1.50 in)
Weight (dry)
55 kg (121 lb)
1620 Old Apex Road
Shipping & Payment Options
