Vickers | PVH98QICRAF13S10CM731
PVH98QICRAF13S10CM731
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH98QICRAF13S10CM731 pump is manufactured by Vickers in the PVH and PVE Open-Circuit Piston Pumps series. This variable displacement axial piston unit supplies hydraulic actuators with pressurized fluid while allowing automatic flow adjustment to meet system demand. Its displacement is 98.3 cm³ per revolution, so each rotation delivers a fixed volume that determines baseline flow capability. At the rated speed of 1800 rpm the pump outputs 170 L/min, supporting medium-size mobile or industrial circuits. The CM compensator keeps system pressure between 35 and 140 bar and leaves the factory set at 70 bar, enabling ready-to-install control of load pressure. Operating limits extend to 250 bar, permitting use in higher pressure loops without overstressing internal parts. Clockwise rotation matches right-hand prime movers and avoids shaft coupling changes.
Control design number 31 identifies the internal valving and spring configuration selected for this model. Fluid enters and leaves through SAE four-bolt flange ports, simplifying rigid hose connections in standard SAE layouts. The housing attaches to power sources with an SAE C four-bolt mounting flange, and torque is transmitted through an SAE CC straight keyed shaft end, both conforming to J744 dimensions for interchangeability. A single one-way shaft seal prevents external leakage while allowing normal pressure balance across the drive end. If a secondary pump is required, a thru-drive rear mount in the SAE A two-bolt pattern lets an auxiliary unit be stacked without extra adaptors. These mechanical features complete the pump interface package and allow straightforward integration into automated hydraulic machinery.
Technical Specifications
Control Design Number
31
Displacement
98.3 cm3/rev (6.0 in3/rev)
Factory Pressure Setting
70 bar (CM7)
Main Ports
SAE 4-Bolt Flange Ports
Max Pressure
250 bar (3625 psi)
Mounting Flange
SAE C 4-Bolt (SAE J744-127-4)
Output Flow @ 1800 Rpm
170 L/min (45 gpm)
Pressure Control Type
CM Compensator (35-140 bar)
Pump Type
Variable Displacement Axial Piston
Rated Speed
1800 rpm
Rotation
Right-Hand (Clockwise)
Shaft Seal
Single, One-Way
Shaft-end Type
SAE CC Straight Keyed (J744-38-1)
Thru-drive Rear Mount
SAE A 2-Bolt (SAE J744-82-2)
1620 Old Apex Road
Shipping & Payment Options
