Vickers | PVH74QICRF1S10C2531
PVH74QICRF1S10C2531
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH74QICRF1S10C2531 pump is manufactured by Vickers and belongs to the PVH and PVE Open-Circuit Piston Pumps series. It serves hydraulic automation loops that require steady open-circuit flow to cylinders and machine tools. The quiet industrial design minimizes airborne noise, and the right-hand (clockwise) rotation aligns with common electric motor drives. An SAE C 4-bolt mounting flange permits direct coupling to standard power units. Geometric displacement is 73.7 cm³/rev, so at 1800 rpm the pump outputs 125 L/min (33 gpm) to the system. Flow is routed through SAE 4-bolt flange ports that support rigid, high-pressure piping. Pump design number 10 denotes the internal component revision used in this model.
This model employs a pressure compensator, identified by code C, to reduce displacement automatically once circuit pressure reaches the preset value. The factory pressure setting is 25 MPa (250 bar), and maximum working pressure is limited to 250 bar (3625 psi) to protect critical parts. Control design number 31 specifies the orifice sizing and spring range applied to the compensator group. Rated speed extends to 1800 rpm, allowing the pump to match typical four-pole motor outputs without overspeeding. A non-thru-drive configuration blocks the addition of piggyback pumps, which simplifies installation in tight spaces. A single one-way shaft seal contains hydraulic fluid along the drive shaft and keeps contaminants out of the housing.
Technical Specifications
Control Design Number
31
Control Type
Pressure Compensator (C)
Design/application
Quiet Industrial (QI)
Drive Configuration
Non-Thru-Drive
Factory Pressure Setting
25 MPa (250 bar)
Geometric Displacement
73.7 cm³/rev (4.50 in³/rev)
Main Ports
SAE 4-bolt flange ports
Max Pressure
250 bar (3625 psi)
Max Speed
1800 rpm
Mounting Flange
SAE C 4-bolt (SAE J744-127-4)
Output Flow @ 1800 Rpm
125 L/min (33 gpm)
Pump Design Number
10
Rotation
Right-Hand (CW)
Shaft Seal
Single, one-way
1620 Old Apex Road
Shipping & Payment Options
