Vickers | PVH131R16AF30H001400BE1AY1BP000A
PVH131R16AF30H001400BE1AY1BP000A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH131R16AF30H001400BE1AY1BP000A pump belongs to the PVH and PVE Open-Circuit Piston Pumps series from Vickers and supplies pressurized fluid for hydraulic automation circuits. It is built with a maximum displacement of 131.1 cm³ per revolution so that large cylinders receive adequate volume per cycle. At 1500 rpm the unit delivers 223 L/min, and the design caps operating speed at the same 1500 rpm to match standard motor outputs. System pressure can reach 250 bar, while a factory differential setting of 20 bar establishes the compensator shift point for load sensing. Right-hand (clockwise) rotation aligns with common prime movers, and the main service ports use an SAE 4-bolt flange for stable hose connections. Pressure is regulated through an IC control that fits a CETOP 3 interface, allowing cartridge valves to manage standby and cut-off functions.
The mechanical end tolerates 1200 N·m of input torque, giving the shaft enough strength for belt or gear drives. A 44.45 mm diameter shaft that projects 67.0 mm from the housing provides the geometry needed for rigid couplings, and an 11.11 mm key prevents hub slippage during start-up. For tandem arrangements the pump includes an SAE A rear-mount thru-drive capable of passing 640 N·m to a secondary unit, keeping combined flow available without overstressing bearings. These torque, size, and mounting figures allow the pump to fit into compact power packs while maintaining the pressure and flow ratings noted above.
Technical Specifications
Factory Differential Setting
20 bar
Key Width (e)
11.11 mm (0.438 in)
Main Ports
SAE 4-Bolt Flange
Max Displacement
131.1 cm³/rev (8.0 in³/rev)
Max Input Torque
1200 N·m (10,620 lb·in)
Max Pressure
250 bar (3625 psi)
Max Speed
1500 rpm
Max Thru-drive Torque
640 N·m (5,660 lb·in)
Output Flow @ 1500 Rpm
223 L/min (59 gpm)
Pressure Control Type
IC (CETOP 3 Interface)
Rotation
Right-Hand (CW)
Shaft Diameter (a)
44.45 mm (1.75 in)
Shaft Dimension (c)
67.0 mm (2.64 in)
Thru-drive Configuration
SAE A Rear Mount
1620 Old Apex Road
Shipping & Payment Options
