Vickers | PVH131QIC-RCF-16S-10-C21V17-31-070
PVH131QIC RCF 16S 10 C21V17 31 070
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH131QIC RCF 16S 10 C21V17 31 070 pump belongs to the PVH and PVE Open-Circuit Piston Pumps series from Vickers and supplies hydraulic power for automated machinery. It is configured for quiet industrial duty, so the installation limits airborne noise in enclosed facilities. A displacement of 131.1 cm³ per revolution defines the volume moved each shaft turn, and a rated speed of 1500 rpm at zero inlet establishes the maximum running point for continuous service. The rated pressure of 250 bar allows the unit to sustain medium-pressure circuits without overstressing internal parts. When operated at 1500 rpm and 250 bar, it delivers 186 L/min to keep cylinders and motors moving smoothly. An SAE C four-bolt mounting flange aligns with standard drive housings, while SAE four-bolt flange ports simplify hookup to common hydraulic lines.
The pump carries design number 10, marking its internal configuration within the series for maintenance reference. Pressure is controlled by a compensator, and that device is set to 210 bar so outlet flow is reduced once system demand is met. A load-sense differential of 17 bar lets the unit trim output to match varying actuator loads, which reduces heat generation and saves energy. At 1800 rpm and 250 bar, available flow rises to 223 L/min to support faster machine cycles. Right-hand clockwise rotation matches most engine and motor drives used in industrial skids. A single one-way shaft seal prevents oil from escaping along the drive shaft. The pump’s hydraulic balancing relies on stable compensator control, so pressure transients remain limited even during rapid flow changes.
Technical Specifications
Application Style
Quiet Industrial (QI)
Compensator Setting
210 bar
Design Number
10
Displacement
131.1 cm3/rev (8.0 in3/rev)
Flow At 1500 Rpm (250 Bar)
186 L/min (49 gpm)
Flow At 1800 Rpm (250 Bar)
223 L/min (59 gpm)
Load Sense Differential
17 bar
Main Ports
SAE 4-Bolt Flange Ports
Mounting Flange
SAE C 4-Bolt (J744-127-4)
Pressure Control
Compensator (C)
Rated Pressure
250 bar (QI)
Rated Speed (zero Inlet)
1500 rpm
Rotation
Right-Hand (CW)
Shaft Seal
Single, One-Way
1620 Old Apex Road
Shipping & Payment Options
