Vickers | PVH131CRBF16S10IC31
PVH131CRBF16S10IC31
Request a Quote
In-Stock, Ships 1-2 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH131CRBF16S10IC31 pump belongs to the PVH and PVE Open-Circuit Piston Pumps series and is produced by Vickers for hydraulic automation that requires controlled open-circuit flow. It delivers a displacement of 131.1 cm³ per revolution to supply the oil volume demanded by medium to large actuators. Right-hand clockwise rotation aligns with standard engine outputs, and a maximum speed of 2000 rpm supports rapid cycle duties. At that speed the unit provides 241 L/min of flow, giving ample capacity for cylinders and motors. The housing is rated for 250 bar (3625 psi) so it can operate in high-pressure circuits. An SAE C 4-bolt mounting flange positions the pump squarely on common power-take-off faces, while SAE 4-bolt flange ports accept rigid lines with minimal pressure loss. Power enters through an SAE D straight keyed shaft (J744-44-1) that matches widely available drive couplings.
The shaft diameter is 44.45 mm (1.75 in), allowing direct engagement with standard hub bores, and the 11.11 mm (0.438 in) key width locks the hub against torsional slip. The input end tolerates up to 1200 N·m of torque so the pump can be driven by high-power electric or diesel prime movers. A rear thru-drive pad with an SAE B 2-/4-bolt pattern (J744-101) permits stacking an auxiliary pump, and that interface can transmit 640 N·m of torque without overstressing the main bearings. A single one-way shaft seal prevents external leakage while letting case pressure vent internally. Industrial Control (IC) configuration maintains consistent outlet pressure, making the pump suitable for automated machinery that needs stable hydraulic performance.
Technical Specifications
Control Type
Industrial Control (IC)
Displacement
131.1 cm³/rev
Input Shaft
SAE D Straight Keyed (J744-44-1)
Input Shaft Diameter
44.45 mm (1.75 in)
Key Width
11.11 mm (0.438 in)
Main Ports
SAE 4-Bolt Flange Ports
Max Input Shaft Torque
1200 N·m
Max Pressure
250 bar (3625 psi)
Max Speed
2000 rpm
Max Thru-drive Output Torque
640 N·m
Mounting Flange
SAE C 4-Bolt (J744-127-4)
Output Flow @ 2000 Rpm
241 L/min
Rotation
Right-Hand (Clockwise)
Shaft Seal
Single (One-Way)
Thru-drive Rear Pad
SAE B 2-/4-Bolt (J744-101)
1620 Old Apex Road
Shipping & Payment Options
