Vickers | PVH131CRAF16S10C2531
PVH131CRAF16S10C2531
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH131CRAF16S10C2531 pump belongs to the PVH and PVE Open-Circuit Piston Pumps series produced by Vickers for hydraulic automation where controlled flow and stable pressure are required. It uses a pressure compensator identified by the letter C to regulate outlet pressure, and the factory setting is fixed at 250 bar (3625 psi) so circuits receive a predefined limit without manual adjustment. A maximum displacement of 131.1 cm³ per revolution (8.0 in³ per revolution) determines the volume delivered each cycle, while a rated flow of 241 L/min (64 gpm) at 2000 rpm matches common system demands. The rated speed of 2000 rpm sets the operating envelope for prime movers, and right-hand clockwise rotation aligns the shaft direction with standard industrial drive arrangements.
Connection to the hydraulic network is through SAE four-bolt flange ports, and the housing itself mounts on an SAE C four-bolt flange compliant with J744-127-4 for straightforward interchange with similar frames. A shaft diameter of 44.45 mm (1.75 in) provides the interface to couplings, protected by a single one-way shaft seal that keeps fluid inside and contamination out. The input side can withstand up to 1200 Nm (10,620 lb·in) of torque, while the thru-drive section is limited to 640 Nm (5,660 lb·in) so secondary pumps stay within safe limits. Maximum working pressure is rated at 250 bar (3625 psi), matching the factory setting to prevent overload in continuous service.
Technical Specifications
Compensator Type
Pressure Compensator (C)
Factory Pressure Setting
250 bar (3625 psi)
Main Ports
SAE 4-Bolt Flange Ports
Max Displacement
131.1 cm3/rev (8.0 in3/rev)
Max Input Torque (shaft 16)
1200 Nm (10,620 lb·in)
Max Thru-drive Torque (shaft 16)
640 Nm (5,660 lb·in)
Max Working Pressure
250 bar (3625 psi)
Mounting Flange
SAE C 4-Bolt (J744-127-4)
Rated Flow @ 2000 Rpm
241 L/min (64 gpm)
Rated Speed
2000 rpm
Rotation
Right-Hand (Clockwise)
Shaft Diameter (a)
44.45 mm (1.75 in)
Shaft Seal
Single, One-Way
1620 Old Apex Road
Shipping & Payment Options
