Vickers | PVH1310PCRCM16S10C16
PVH1310PCRCM16S10C16
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH1310PCRCM16S10C16 pump belongs to the PVH and PVE Open-Circuit Piston Pumps series and is produced by Vickers for hydraulic automation where variable flow at moderate to high pressure is required. Pump design number 10 specifies its internal build for parts interchange. A maximum displacement of 131.1 cm³ per revolution supplies significant volume each cycle, and a rated flow of 241 L/min is achieved at the nominal speed of 2000 rpm. The unit tolerates system demands up to 250 bar, allowing use on heavy-duty mobile or industrial circuits. Right-hand clockwise rotation aligns with common power-takeoff drives. Output is controlled by a pressure compensator that modulates swashplate angle; this device operates between 70 and 250 bar and is factory set to limit pressure at 160 bar, preventing excess load on the prime mover.
The pump attaches with an SAE C four-bolt flange conforming to SAE J744-127-4, making it compatible with standard engine or gearbox pads. A shaft diameter of 44.45 mm with an 11.11 mm key transmits torque securely, while a single one-way shaft seal retains fluid under varying inlet conditions. The input end withstands 1200 N·m of torque, giving headroom for full-pressure starts, and the thru-drive passes up to 640 N·m so an auxiliary pump can share the same prime mover. These mechanical features support compact multi-pump assemblies and keep leakage risk low, rounding out the hydraulic capabilities described above.
Technical Specifications
Compensator Range
70–250 bar (C)
Compensator Type
Pressure Compensator (C)
Factory Pressure Setting
160 bar (C16)
Max Input Torque (shaft 16)
1200 N·m (10,620 lb-in)
Max Thru-drive Output Torque
640 N·m (5,660 lb-in)
Maximum Displacement
131.1 cm3/rev (8.0 in3/rev)
Maximum Pressure
250 bar (3625 psi)
Mounting Flange
SAE C 4-Bolt (SAE J744-127-4)
Pump Design Number
10
Rated Flow @ 2000 Rpm
241 L/min (64 gpm)
Rated Speed
2000 rpm
Rotation
Right-Hand (Clockwise)
Shaft Diameter
44.45 mm (1.75 in)
Shaft Key Width
11.11 mm (0.438 in)
Shaft Seal
Single (One-Way)
1620 Old Apex Road
Shipping & Payment Options
