Vickers | PVH098R13AJ30B212000AA1AD100030A
PVH098R13AJ30B212000AA1AD100030A
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH098R13AJ30B212000AA1AD100030A piston pump belongs to the PVH and PVE Open-Circuit Piston Pumps series and is manufactured by Vickers for hydraulic automation on mobile equipment. It carries pump design number 10 and control design number 31, defining its internal control geometry for system integration. The unit is configured for mobile applications, so its compact SAE C 4-bolt mounting flange allows direct installation on engine PTO pads. Geometric displacement is fixed at 98.3 cm³ per revolution, giving predictable volume transfer with every shaft turn; at 2100 rpm this displacement yields 181 L/min of output flow to drive cylinders and motors. Right-hand clockwise rotation matches common power-train layouts, while a single one-way shaft seal limits external leakage along the drive end. The shaft terminates in an SAE CC straight keyed profile to couple with standard keyed adapters without fretting.
For circuit protection, the factory pressure setting is 210 bar, and the compensator can be tuned between 70 and 250 bar to suit attachments that shift from light trimming to full breakout force. The maximum pressure capability of 250 bar defines the upper load the rotating group can withstand, while a 20 bar load-sense differential keeps the outlet just above demand to minimize energy loss and heat generation. The pump tolerates input speeds up to 2100 rpm, establishing a mechanical ceiling for engine or motor drives in continuous duty cycles. Main pressure and suction lines attach through an SAE 4-bolt flange, so standard code-61 hoses can be fitted without adapters. A thru-drive rear pad drilled for an SAE A 2-bolt interface permits tandem mounting of an auxiliary pump when extra circuits are required, and the shared centerline maintains shaft alignment under combined torque.
Technical Specifications
Control Design Number
31
Design/application
Mobile
Factory Pressure Setting
210 bar
Geometric Displacement
98.3 cm3/rev (6.00 in3/rev)
Load-sense Differential
20 bar (290 psi)
Main Ports
SAE 4-bolt flange
Max Pressure
250 bar (3625 psi)
Max Speed
2100 rpm
Mounting Flange
SAE C 4-bolt (SAE J744-127-4)
Output Flow @ 2100 Rpm
181 L/min (48 gpm)
Pressure Compensator Range
70–250 bar
Pump Design Number
10
Rotation
Right-Hand (CW)
Shaft Seal
Single, One-Way
Shaft-end Type
SAE CC Straight Keyed (J744-38-1)
Thru-drive Rear Pad
SAE A 2-bolt (SAE J744-82-2)
1620 Old Apex Road
Shipping & Payment Options
