Vickers | XCG2V10FWB10
XCG2V10FWB10
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The XCG2V10FWB10 valve is part of the Pressure Control Valves series produced by Vickers and is used to regulate system pressure in automated hydraulic circuits. Pressure is adjusted with a wrench and cover mechanism, allowing technicians to set the limit within a 200 bar control range. The inlet ports P and x tolerate up to 350 bar, port T is rated for 315 bar, and port Y accepts back pressure to 315 bar, so the valve suits high-pressure lines and remote drains. A maximum flow of 650 L/min enables service on large pump outputs without excessive pressure drop. The unit features an internal drain with an external pilot, separating pilot flow from the tank return path. Installation is on an ISO 6264-10 (CETOP 10) interface, standardizing manifold mounting across similar equipment.
The valve weighs 4.4 kg, making it manageable during assembly or replacement. Reliable performance requires fluid cleanliness of ISO 19/17/14 to minimize wear on internal surfaces. Mineral oil is the specified working fluid, and operation remains stable between −30 °C and +80 °C, accommodating wide ambient conditions. The design accepts viscosities from 10 to 800 mm²/s, so seasonal changes rarely demand fluid substitution. Nitrile O-rings seal the passages and maintain compatibility with the recommended oil and temperature span. Pilot supply and drain connections are provided by G1/4 threads on both the X and Y ports, simplifying the selection of standard tubing and fittings for auxiliary lines.
Technical Specifications
Adjustment Type
Wrench And Cover
Fluid Cleanliness Level
ISO 19/17/14
Fluid Temperature Range
-30 to +80 C
Fluid Viscosity Range
10 to 800 mm2/s
Hydraulic Fluid
Mineral Oil
Max Back Pressure (port Y)
315 bar
Max Operating Pressure (port T)
315 bar
Max Operating Pressure (ports P,x)
350 bar
Maximum Flow
650 L/min
Mounting Interface
ISO 6264-10 (CETOP 10)
O-ring Material
Nitrile
Pilot/drain Configuration
Internal Drain, External Pilot
Pressure Range
200 bar
Weight
4.4 kg
X Port Thread
G1/4
Y Port Thread
G1/4
1620 Old Apex Road
Shipping & Payment Options
