Vickers | URG110C13
URG110C13
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The URG110C13 belongs to the Pressure Control Valves series produced by Vickers and is used to manage hydraulic pressure and automatically unload circuits when set limits are reached. This unloading relief valve is pilot operated and built in a two-stage configuration so that a small pilot section governs the main poppet. Pressure is adjusted by a screw with a locknut, allowing repeatable settings during maintenance. An external drain routes pilot flow back to tank and prevents backpressure from influencing the setpoint. The valve handles a maximum pressure of 3000 psi and accommodates flow up to 246.0 L/min without loss of stability. It is intended for systems that use petroleum oils as the working fluid.
A cleanliness rating of 19/17/14 defines the allowable particle contamination level that must be maintained in the hydraulic oil. A 1/4 NPTF gauge port is provided so technicians can verify the operating pressure close to the inlet cavity. Overall length measures 217.424 mm and width is 120.650 mm, dimensions that fit common subplate patterns. Nitrile seals are supplied to contain oil across the full operating range. The body mounts on subplate or manifold surfaces, simplifying replacement in modular power units. Service temperatures can be as low as -20 °C and as high as 70 °C, covering typical mobile and industrial environments.
Technical Specifications
Actuation Type
Pilot Operated
Adjustment Type
Screw With Locknut
Drain Type
External
Flow Rate
246.0 L/min
Fluid Cleanliness Code
19/17/14
Fluid Compatibility
Petroleum Oils
Gauge Port Thread
1/4 NPTF
Maximum Pressure
3000 psi
Product Length
217.424 mm
Product Width
120.650 mm
Seal Material
Nitrile
Stage
Two Stage
Valve Mount Type
Subplate/Manifold Mounted
Valve Type
Unloading Relief Valve
Working Temperature Max
70 C
Working Temperature Min
-20 C
1620 Old Apex Road
Shipping & Payment Options
