Vickers | RG06D430
RG06D430
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The RG06D430 is part of the Pressure Control Valves series manufactured by Vickers for maintaining consistent system pressure in hydraulic automation circuits. It uses pilot-operated actuation so a small pilot flow governs the main spool, allowing stable regulation at higher flow demands. The two-stage internal layout further refines pressure response by isolating the sensing element from full line pressure. Operators set the desired relief point with a screw and locknut, which holds the setting against vibration. An internal drain routes pilot oil back to the outlet port, eliminating the need for an extra drain line. The valve accepts up to 210 bar system pressure and can pass 114 L/min without excessive pressure rise. It mounts on subplate or manifold interfaces, and the size 06 footprint aligns with common CETOP cavity patterns.
This assembly is classified as a pressure control valve, meaning it modulates downstream pressure rather than flow rate. It is intended for use with petroleum-based hydraulic oils, and the required fluid cleanliness level is 19/17/14 to protect the precision pilot passages. Nitrile seals are fitted to resist swelling or leakage when exposed to these oils. The maximum operating temperature of 70 °C defines the upper thermal limit for both seals and internal components. Compact dimensions—91.440 mm in length, 85.598 mm in width, and 201.422 mm in height—allow the valve to fit densely packed manifolds without encroaching on adjacent components.
Technical Specifications
Actuation Type
Pilot Operated
Adjustment Type
Screw With Locknut
Drain Type
Internal
Flow Rate
114 L/min
Fluid Cleanliness
19/17/14 Micron
Fluid Compatibility
Petroleum Oils
Height
201.422 mm
Length
91.440 mm
Maximum Pressure
210 bar
Seal Material
Nitrile
Size
06
Stage
Two Stage
Valve Mount Type
Subplate/Manifold Mounted
Valve Type
Pressure Control Valve
Width
85.598 mm
Working Temperature Max
70 C
1620 Old Apex Road
Shipping & Payment Options
