Vickers | RCT06A130
RCT06A130
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The RCT06A130 pressure control valve belongs to the Pressure Control Valves series and is produced by Vickers for hydraulic automation circuits. It uses a pilot operated actuation to maintain outlet pressure with minimal fluctuation. The two stage design allows a preliminary pilot stage to modulate a main stage for smoother response. A rated flow capacity of 114 L/min supports medium-duty lines where steady volume must pass through the valve. The unit withstands up to 210 bar so it can be installed in high-pressure supply manifolds common to industrial machinery. Pressure is set with a screw and locknut arrangement that keeps the chosen setting from drifting during operation. It mounts through a 3/4 inch NPT pipe connection, enabling direct insertion into line plumbing without a manifold block. The size 06 envelope matches standard port dimensions for compact circuit layouts.
An integral check valve permits free reverse flow while the main stage controls downstream pressure. Internal drainage returns pilot oil to the inlet side, eliminating the need for an external drain line. Nitrile seals resist common mineral hydraulic fluids and help contain leakage under cycling loads. The valve is compatible with petroleum oils, aligning with typical mobile and industrial hydraulic fluids. Operation requires no electrical connection, which simplifies installation in purely hydraulic systems. Acceptable fluid cleanliness is limited to code 19/17/14 so a corresponding filtration level is necessary. The body measures 95.250 mm in length, 107.950 mm in width, and 201.422 mm in height, allowing placement in tight equipment enclosures.
Technical Specifications
Actuation Type
Pilot Operated
Adjustment Type
Screw With Locknut
Check Valve
Yes
Drain Type
Internal
Electrical Connection
None
Flow Rate
114 L/min
Fluid Cleanliness Code
19/17/14
Fluid Compatibility
Petroleum Oils
Height
201.422 mm
Length
95.250 mm
Maximum Pressure
210 bar
Seal Material
Nitrile
Size
06
Stage
Two Stage
Valve Mount Type
3/4 inch NPT Pipe Mount
Width
107.950 mm
1620 Old Apex Road
Shipping & Payment Options
