Vickers | CG5V10HWB2MUH710
CG5V10HWB2MUH710
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The CG5V10HWB2MUH710 valve belongs to the Pressure Control Valves series from Vickers and regulates hydraulic pressure in automated systems. It is a normally open design that allows fluid to pass until a control signal shifts it. The unit withstands a maximum pressure of 350 bar at ports p or X for high-pressure circuits. Return flow is accepted with a back pressure of 210 bar at port y, and port t can operate up to 315 bar. Flow capacity reaches 650 L/min to serve large actuators. Pilot ports X and Y are threaded G 1/4 inch, and all process ports use BSP threads for compatibility with standard pipework. The body mounts on an ISO 6264-10 interface, and the subplate surface must have a roughness of Ra 0.8 µm to prevent leakage.
Pressure is set with a wrench under a protective cover to discourage unauthorized adjustment, and a 24 VDC coil supplies the actuation energy without an included electrical connector, leaving wiring choices open. A plain manual override lets technicians shift the spool during commissioning or power loss. Hydraulic fluid cleanliness must meet ISO 19/17/14 to limit wear inside the valve. Mounting bolts are tightened to 430 Nm to secure the housing to the subplate. The assembly weighs 5.6 kg, permitting single-person handling during service. These characteristics position the CG5V10HWB2MUH710 for stable pressure regulation in industrial hydraulic automation lines.
Technical Specifications
Adjustment Type
Wrench and Cover
Coil Voltage
24 VDC
Electrical Connector
None Included
Fluid Cleanliness Level
ISO 19/17/14
Manual Override
Plain
Mating Surface Roughness
Ra 0.8 µm
Max Back Pressure (y)
210 bar
Max Pressure (p, X)
350 bar
Max Pressure (t)
315 bar
Maximum Flow
650 L/min
Mounting Bolt Torque
430 Nm
Mounting Pattern
ISO 6264-10
Pilot Ports X, Y
G 1/4 in
Port Thread
BSP
Valve State
Normally Open
Weight
5.6 kg
1620 Old Apex Road
Shipping & Payment Options
