CG06CY50

The CG06CY50 valve is produced by Vickers within the Pressure Control Valves series and is intended to protect hydraulic automation circuits from over-pressure. Classified as a relief valve, it vents excess flow once the spring setting is met to maintain safe operating conditions. A subplate mounted interface lets the unit be removed without disturbing pipework, shortening service downtime in manifold banks. The size 06 port pattern aligns with medium-capacity directional stacks found in machine tools and presses. Users can tune the spring from a minimum set pressure of 35 bar up to a maximum of 140 bar so the same block can serve low-force clamping or higher-force actuator sections. The body length of 156.464 mm keeps the valve compact, permitting dense grouping of multiple pressure stages on a single base plate.

Overall height is 159.512 mm, allowing the assembly to clear cabinet lids while still leaving space for electrical raceways above the manifold. A width of 106.426 mm provides sufficient sealing area against the mounting surface yet keeps the footprint narrow, which helps designers pack multiple components in tight control blocks. The rectangular envelope also ensures straight flow paths through the inlet and outlet galleries, reducing turbulence and internal pressure loss. When installed vertically the dimensional proportions let maintenance personnel grip the body with standard wrenches without contacting adjacent parts, streamlining periodic inspection or replacement tasks. These physical characteristics support reliable integration of the CG06CY50 into compact hydraulic power units where space constraints are critical.