PVXS-180-M-R-LR-0000-000

The PVXS-180-M-R-LR-0000-000 is produced by Vickers within the Piston Pumps series and is intended to deliver adjustable hydraulic flow in automated machinery. Built according to the metric basic standard, it integrates easily with systems that follow metric dimensions and fastener threads. Its variable displacement design lets control loops vary output flow on demand, and the maximum geometric displacement of 180 cm³ per revolution establishes the pump’s volume capacity at full swash. The yoke is arranged in a single side center A displacement zone, giving the swash plate one-sided movement around the neutral position for predictable control response. Because no yoke position indicator is installed, the machine must reference displacement electronically or through external feedback rather than a mechanical pointer.

Clockwise rotation aligns the unit with prime movers that deliver right-hand shaft rotation. An ISO3019/2 160A2SW mounting flange supplies a standardized face pattern so the device bolts directly to compliant motor housings. The drive shaft ends in an ISO straight key, enabling straightforward coupling with keyed metric hubs and avoiding spline adapters. Axial in-line rear ports keep the suction and pressure connections on the rear centerline, which simplifies rigid manifold mounting, while SAE ports secured with metric bolts bridge American port geometry and metric hardware. A single shaft seal limits leakage at the drive end, and the seal material FKM withstands hot hydraulic oil and common additives. Primer jet black RAL 9005 surface coating provides baseline corrosion protection before any topcoat is applied. With no thru-drive, the pump cannot be tandem-mounted, ensuring all power is dedicated to the primary circuit.