Vickers | PVH131QIC-RCF-16S-10-C21V17-31
PVH131QIC RCF 16S 10 C21V17 31
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PVH131QIC RCF 16S 10 C21V17 31 piston pump is produced by Vickers for the Piston Pumps series and supplies hydraulic flow for automated machinery. Its displacement of 131.1 cm³ per revolution sets the volume delivered to actuators, while a rated speed of 1500 rpm balances output with bearing life. The unit turns in a right-hand clockwise direction, so drive axes must match that orientation. A 1.75 in straight keyed SAE C input shaft transfers torque reliably from electric or diesel prime movers, and the SAE C four-bolt mounting flange secures the housing to common adapters. A pressure-compensator control trims swashplate position to maintain preset pressure without wasting energy, and the pump withstands a maximum operating pressure of 250 bar for medium-pressure circuits.
Fluid enters through a 2.5 in Code 61 inlet flange that reduces suction losses, then exits via a 1.25 in Code 62 outlet flange rated for system pressure. Internal leakage is routed to tank through a .875-14 SAE O-ring case-drain port so case pressure stays low. Load-sense functions are supported because the unit permits 280 bar on the load-sense line, allowing remote pressure feedback. The control cartridge mounts on a CETOP 3 interface, making replacement straightforward with standard subplates. Shaft sealing is handled by a single seal that contains oil and blocks contaminants. Together these features fit automated hydraulic installations that require stable pressure, efficient flow, and standardized connections.
Technical Specifications
Case Drain Port
.875-14 SAE O-Ring
Control Interface
CETOP 3 (IC)
Control Type
Pressure Compensator (C)
Displacement
131.1 cm3/rev (8.00 in3/rev)
Inlet Port Size
2.5 in Code 61 flange
Input Shaft
1.75 in Straight Keyed (SAE C)
Max Load-sense Pressure
280 bar (4060 psi)
Max Operating Pressure
250 bar (3625 psi)
Mounting Flange
SAE C, 4-Bolt
Outlet Port Size
1.25 in Code 62 flange
Rated Speed (qic)
1500 rpm
Rotation Direction
Right-Hand (CW)
Shaft Seal
Single
1620 Old Apex Road
Shipping & Payment Options
