Vickers | PV020B2RSE1S20C21D11
PV020B2RSE1S20C21D11
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PV020B2RSE1S20C21D11 pump is manufactured by Vickers within the Piston Pumps series and is intended for hydraulic automation circuits that require stable flow under varying loads. Its displacement is 21.1 cm³ per revolution, defining the volume delivered with each shaft turn, and at the rated speed of 1800 rpm the unit supplies flow appropriate for industrial actuators. Right-hand clockwise rotation matches common motor drive arrangements, while a pressure compensator control modulates the swash-plate to hold system pressure automatically. The pump withstands up to 210 bar operating pressure, and input power reaches 14.9 kW at this limit so prime mover sizing can be matched precisely. A SAE J744 101-2 (SAE B) mounting flange provides a standard mechanical interface, and all working ports are positioned on the rear face with SAE O-ring seals for straightforward manifold routing.
Fluid enters through a 1-5/8-12 SAE O-ring boss inlet thread that supports high-flow suction hoses, and pressure oil exits via a 1-1/16-12 SAE O-ring boss outlet for direct connection to system lines. An SAE-8 O-ring case drain port returns leakage flow to tank, and case pressure must remain below 0.35 bar to protect internal bearings. Maintaining oil cleanliness at ISO 18/13 limits wear on pistons and valve plates, while an acoustic output of 71 dB keeps noise within typical factory guidelines. The assembly weighs 14 kg, enabling one-person handling during installation or service. These hydraulic, mechanical, and service parameters make the unit suitable for compact power packs that demand consistent performance and controlled pressure regulation.
Technical Specifications
Approximate Weight
14 kg
Case Drain Port
SAE-8 O-Ring
Control Type
Pressure Compensator
Displacement
21.1 cm³/rev
Fluid Cleanliness
ISO 18/13
Inlet Port Thread
1-5/8-12 SAE (ORB)
Input Power At Max
14.9 kW
Max Operating Pressure
210 bar
Maximum Case Pressure
0.35 bar
Mounting Flange
SAE J744 101-2 (SAE B)
Noise Level
71 dB
Outlet Port Thread
1-1/16-12 SAE (ORB)
Port Location
Rear
Port Type
SAE O-Ring (SE)
Rated Speed
1800 rpm
Rotation
Right-Hand (CW)
1620 Old Apex Road
Shipping & Payment Options
