PF9-713-20-BCE-3

The PF9-713-20-BCE-3 model belongs to the Piston Pumps series produced by Vickers. Designed to convert mechanical input into hydraulic flow for automated circuits, the unit sustains a continuous operating pressure of 1000 psi while running at 3000 rpm, so it can maintain stable fluid delivery under load. A cylinder bore of 19/32 in defines the chamber size that receives the piston, and with a displacement of 0.410 cu in per revolution the pump supplies a predictable volume each cycle. The 20 ° housing angle sets the swashplate tilt that governs piston stroke, while a 30 ° pressure angle balances axial and radial forces to reduce wear during prolonged service. These geometric parameters combine to support consistent flow and long service life in fixed industrial installations.

Connection and drive features match the performance profile described above. Fluid lines mount directly to an inlet and outlet port machined with a 3/4-16 NF-3 thread, and a separate 7/16-20 NF-3 thread on the drain port returns case leakage to tank. The rotor can spin up to a maximum continuous speed of 3750 rpm when system pressure is reduced, allowing higher flow demand during low-load conditions. Power is transmitted through an external stub tooth spline that follows a 20/40 pitch, ensuring positive torque transfer to the shaft without fretting. By integrating these port sizes, speed capability, and drive geometry, the model fits easily into standardized manifolds and couplings used throughout hydraulic automation cells.