Vickers | VVA10FP-CDWW21
VVA10FP-CDWW21
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VVA10FP-CDWW21 hydraulic motor is produced by Vickers as part of the Hydraulic Motors series. It provides rotary actuation for hydraulic automation tasks. Its geometric displacement is 10 cm³ per revolution, setting the volumetric flow needed to reach target speed and torque. The unit tolerates a maximum operating pressure of 100 bar so it can be placed in medium-pressure circuits without pressure relief modifications. A speed range from 800 to 1800 RPM defines the usable operating window for stable motion control. The clockwise rotation seen from the shaft end simplifies matching with pumps that share the same direction. Up to three pump sections can be attached, allowing stacked assemblies when multi-stage flow is required. The rated operating temperature spans from -10 °C to 70 °C, letting the motor perform in typical mobile or industrial environments without supplemental heating or cooling.
The inlet port admits oil at pressures between -0.2 and 1.0 bar, which accommodates slight vacuum during cold starts and modest positive head when the reservoir is elevated. Drain port pressure is limited to 1.0 bar so return plumbing must avoid excessive backpressure. An absolute filtration rating of 25 µm is specified to keep abrasive particles from the internal gears and bearings. The motor can run on oil viscosities from 16 to 160 cSt, giving flexibility to use fluids that thin under heat or thicken in cold weather. For initial startup it permits viscosities up to 800 cSt at full displacement and 200 cSt at zero displacement, protecting internal surfaces while the fluid warms. These hydraulic limits guide reservoir design, filter selection, and fluid maintenance so the VVA10FP-CDWW21 maintains reliable output over its service life.
Technical Specifications
Drain Port Pressure Max
1.0 bar
Filtration Rating (absolute)
25 µm
Geometric Displacement
10 cm³/rev
Inlet Port Pressure Max
1.0 bar
Inlet Port Pressure Min
-0.2 bar
Max Operating Pressure
100 bar
Max Operating Temperature
70 °C
Max Pump Sections
3
Max Speed
1800 RPM
Min Operating Temperature
-10 °C
Min Speed
800 RPM
Rotation (shaft End View)
Clockwise
Running Viscosity Max
160 cSt
Running Viscosity Min
16 cSt
Start Viscosity (full Displ.)
800 cSt
Start Viscosity (zero Displ.)
200 cSt
1620 Old Apex Road
Shipping & Payment Options
