Vickers | VP10DRCA1AN-02800
VP10DRCA1AN 02800
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The VP10DRCA1AN 02800 cylinder belongs to the Hydraulic Cylinders series produced by Vickers for linear motion tasks in automated hydraulic and pneumatic systems. It uses a 2.00 in bore to create controlled force when pressurized fluid enters the barrel. A hard anodic coating on the tubing interior resists wear from piston travel and contamination. The unit accepts up to 400 psi during hydraulic service and 250 psi when supplied with air, enabling crossover use in mixed-media machinery. An aluminum alloy piston minimizes inertial load while supporting consistent seal contact. The rod is made from hard-chrome-plated steel to limit scoring under side load, and steel tie rods provide structural integrity along the entire stroke. A cap-fixed clevis identified as the MP1 mounting positions the cylinder on a pivot so the rod can align automatically with the driven member.
Initial motion is assisted by a breakaway pressure of 6 psi in extension and 7 psi in retraction, allowing smooth starts while limiting pump load. Nitrile seals maintain containment within a temperature window of –40 to 200 °F to suit most industrial environments. A cast-iron rod bearing coated with Teflon reduces friction during repeated cycles. Fluid entry is handled through a standard NPTF Dryseal port that is placed in the A (1) position to simplify manifold plumbing and reduce leakage. Because a proximity magnet is not furnished, external sensors must be used if position feedback is required. These design choices let the cylinder meet automation duties that demand quick response, minimal leakage, and reliable service life.
Technical Specifications
Body Tubing Coating
Hard Anodic Coated I.D.
Bore Diameter
2.00 in
Breakaway Pressure (extend, A Seals)
6 psi
Breakaway Pressure (retract, A Seals)
7 psi
Mounting Style
Cap Fixed Clevis (MP1)
Operating Pressure (air)
250 psi
Operating Pressure (hydraulic)
400 psi
Operating Temp Range (a Seals)
-40 to 200 F
Piston Material
Aluminum Alloy
Port Location Code
A (1)
Port Type
NPTF Dryseal (Standard)
Proximity Magnet
Not Furnished (N)
Rod Bearing Material
Cast Iron (Teflon Coated)
Rod Material
Hard Chrome Plated Steel
Seal Option
Nitrile (A)
Tie Rod Material
Steel
1620 Old Apex Road
Shipping & Payment Options
