TF12CDCA1AA04000

The TF12CDCA1AA04000 hydraulic cylinder is produced by Vickers within the Hydraulic Cylinders series and is intended to convert fluid energy into linear motion for automated tooling or positioning tasks. A bore diameter of 1.50 in establishes the piston area and therefore the force developed at its rated operating pressure. Stroke length is fixed at 4.00 in, giving the actuator a defined travel range for repeatable cycles. The unit is designed for a nominal hydraulic pressure of 1000 psi, matching common industrial power packs. A cap rectangular flange mounting style designated MF2 provides a rigid face for securing the cylinder to machine structures. Fluid connects through an NPTF port located in the position identified by port code A, allowing straightforward pipe routing. There is no internal cushion, as specified by cushion code A, so end-of-stroke deceleration must be handled externally.

The piston rod carries a yield strength of 100000 psi, giving adequate resistance to column loading during extension. Four tie rods with a 125000 psi yield strength clamp the head and cap, maintaining alignment under cyclic pressure. A U-Cup seal made from nitrile contains hydraulic fluid and supports bidirectional motion without leakage. This seal functions across a temperature range of −40 °F to +250 °F, making the cylinder suitable for both chilled and hot service environments. Extra rod projection is specified at 0.00 in, so the exposed rod length corresponds exactly to the stroke and minimizes required installation space.