Vickers | DG4V4012CMWLB510
DG4V4012CMWLB510
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V4012CMWLB510 valve belongs to the DG4 Directional Valves series and is manufactured by Vickers for hydraulic automation where directional control must be switched electrically. The unit is solenoid operated, allowing rapid spool shifting from an electrical signal without pilot pressure. It mounts on an ISO 4401-05/NFPA D05 subplate, so installation aligns with standard manifold layouts. A maximum operating pressure of 315 bar enables use in high-pressure circuits common on mobile and industrial presses. The rated flow capacity of 115 L/min supports medium-size actuators without excessive pressure drop. Coil power consumption is 37 W, permitting direct drive from conventional 24 VDC control panels with moderate current draw. A 1/2 in NPT wiring housing forms the electrical connection and accepts rigid conduit for field wiring protection. An indicator light is included to show when the solenoid is energized, and a plain manual override lets maintenance personnel shift the spool during power loss.
The valve is compatible with petroleum oils, matching the majority of hydraulic fluids used in industrial machinery. It requires oil cleanliness of 20/18/15 to restrict particulate contamination and extend service life. Buna-N seals are fitted to contain pressure and resist swelling in mineral-based fluids. Internal geometry corresponds to spool type 2, giving the flow path arrangement specified for this application. There is no spool position monitor, so feedback must be obtained from external sensors if status indication is necessary. The enclosure length is 9.380 in, helping designers allocate space on crowded manifold stations. A width of 2.840 in allows side-by-side stacking without interference. The height is 4.590 in, providing clearance for solenoid coils under protective covers.
Technical Specifications
Actuation Type
Solenoid Operated
Electrical Connection
1/2 in NPT Wiring Housing
Fluid Cleanliness
20/18/15
Fluid Compatibility
Petroleum Oils
Height
4.590 in
Indicator Light
Yes
Interface
ISO 4401-05/NFPA D05
Length
9.380 in
Manual Override
Plain
Max Flow
115 L/min
Max Operating Pressure
315 bar
Power Consumption
37 W
Seal Type
Buna-N
Spool Position Monitor
No
Spool Type
2
Width
2.840 in
1620 Old Apex Road
Shipping & Payment Options
