Vickers | DG4V3S6CVMFWB560
DG4V3S6CVMFWB560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6CVMFWB560 valve belongs to the DG4 Directional Valves series produced by Vickers and serves to shift flow paths in hydraulic automation systems. It employs spool type 6, which blocks port P while routing ports A and B to tank, so pump flow is unloaded when the valve sits in neutral. A spring-centered arrangement returns the spool automatically after actuation, ensuring the circuit reverts to its default state without external force. Solenoid identity V places solenoid A at the port A end to clarify electrical orientation during assembly. The valve accommodates a rated flow of 40 l/min (10.5 US gpm), matching medium-capacity power units. A maximum pressure rating of 350 bar (5000 psi) at ports P, A, and B allows operation in high-pressure machinery. Installation uses the ISO 4401-AB-03-4-A mounting interface, commonly referred to as CETOP 3, which standardizes manifold selection and interchangeability.
Design number 60 identifies the engineering revision so spare parts align correctly with this build. The solenoid coil draws 30 W, and a 100% ED duty cycle lets it stay energized continuously without overheating. Class F encapsulation shields the winding from moisture, while Class H insulation tolerates higher temperatures for prolonged service life. Electrical termination is provided by flying leads, designated by the letter F, offering flexible routing inside control enclosures. Conduit entry is through a 1/2 in NPT wiring thread, allowing standard fittings to protect the leads. Hydraulic cleanliness must meet ISO 4406 19/17/14 to minimize wear on the spool and body surfaces. Mounting bolt threads are M5-0.8-6H, and the subplate surface must be flat within 0.013 mm to prevent internal leakage paths.
Technical Specifications
Coil Encapsulation
Class F
Coil Insulation
Class H
Coil Power
30 W
Coil Type
Flying Leads (F)
Design Number
60
Duty Cycle
100% ED
Filtration Requirement
ISO 4406 19/17/14
Max Pressure (p, A, B)
350 bar (5000 psi)
Mounting Bolt Thread
M5-0.8-6H
Mounting Flatness
0.013 mm
Mounting Interface
ISO 4401-AB-03-4-A (CETOP 3)
Rated Flow
40 l/min (10.5 US gpm)
Solenoid Identity
V (Solenoid A at Port A End)
Spool Type
6 (P Blocked; A & B to T)
Spool/spring Arrangement
Spring Centered (C)
Wiring Thread
1/2 in NPT (W)
1620 Old Apex Road
Shipping & Payment Options
