Vickers | DG4V3S6CMX2H460
DG4V3S6CMX2H460
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6CMX2H460 valve is part of the DG4 Directional Valves series manufactured by Vickers for hydraulic automation where dependable flow direction is required. The unit is solenoid operated so an electrical signal shifts the spool without pilot pressure. A 24 VDC coil supplies the magnetizing force, and it draws 30 W during steady operation. Coil windings use Class H insulation, while the potting compound meets Class F thermal limits to tolerate elevated surface temperatures. Continuous duty at ED = 100 % allows the coil to stay energized for long production cycles. Under rated conditions the valve passes 40 L/min (10.5 US gpm) through its flow paths, supporting medium-capacity actuators in mobile or industrial equipment.
The spool inside this model follows the 6C pattern, blocking port P and routing ports A and B to T when the solenoid is not powered. Ports P, A, and B withstand working pressures up to 350 bar (5000 psi), enabling high-pressure circuit integration. System fluid should be maintained at ISO 19/17/14 cleanliness to limit wear on the metering edges. A plain manual override lets technicians shift the spool during setup or loss of power. The mounting face conforms to ISO 4401-AB-03-4-A (CETOP 3) so the valve fits common subplates. Installation uses M5 × 0.8-6H bolts tightened between 4.5 and 6.0 N·m to secure the body and maintain seal integrity.
Technical Specifications
Actuation Type
Solenoid Operated
Coil Encapsulation Class
Class F
Coil Voltage Rating
24 VDC
Coil Winding Class
Class H
Duty Cycle
Continuous (ED=100%)
Fluid Cleanliness
ISO 19/17/14
Manual Override
Plain
Max Operating Pressure (p,a,b)
350 bar (5000 psi)
Mounting Bolt Torque
4.5–6.0 N·m
Mounting Interface
ISO 4401-AB-03-4-A (CETOP 3)
Mounting Thread Size
M5 × 0.8-6H
Power Consumption
30 W
Rated Flow
40 L/min (10.5 USgpm)
Spool/spring Type
6C (P blocked, A&B to T)
1620 Old Apex Road
Shipping & Payment Options
