Vickers | DG4V3S6CMFTWLH560
DG4V3S6CMFTWLH560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6CMFTWLH560 valve belongs to the DG4 Directional Valves series and is produced by Vickers for controlling actuator motion in hydraulic automation systems. It fits a subplate using the ISO 4401-03 interface, so it can be installed on CETOP 3 or NFPA D03 manifolds without additional adapters. The unit withstands 350 bar (5075 psi) at ports P, A, and B, permitting use in high-pressure circuits while passing up to 40 l/min (10.5 USgpm) of oil. A type 6 spool blocks the pressure port and connects both work ports to tank in the centered position, which lets loads be vented when the valve is neutral. The internal C spring arrangement keeps the spool centered until a coil is energized, providing fail-safe return.
This model employs a dual wet-armature solenoid assembly so either end can shift the spool under load while reducing noise and coil wear. Each solenoid is powered from a direct-current source, and the coils are supplied with flying leads to simplify wiring in confined panels. Electrical termination is completed through a terminal block, and an integral 1/2 NPT thread on the housing accepts standard conduit fittings for environmental sealing. The valve limits the tank port to 100 bar (1450 psi), protecting return lines from excessive back-pressure. Together, these features create a bidirectional control element that fits DC-powered machines requiring compact mounting, straightforward electrical hookup, and reliable performance across the rated pressure and flow range.
Technical Specifications
Coil Power Type
DC
Coil Type
Flying Leads
Electrical Connector
Terminal Block
Max Flow
40 l/min (10.5 USgpm)
Mounting Interface
ISO 4401-03 (CETOP 3/NFPA D03)
Mounting Style
Subplate Mounting
Rated Pressure (p, A, B)
350 bar (5075 psi)
Solenoid Configuration
Dual Solenoid
Solenoid Type
Wet Armature
Spool Function
Type 6 (P Blocked, A&B To T)
Spring Arrangement
C (Spring Centered)
Tank Port Max Pressure
100 bar (1450 psi)
Wiring Housing Thread
1/2 NPT
1620 Old Apex Road
Shipping & Payment Options
