Vickers | DG4V3S6CMFPM4WLD7H560EN654
DG4V3S6CMFPM4WLD7H560EN654
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6CMFPM4WLD7H560EN654 model is produced by Vickers as part of the DG4 Directional Valves series and directs hydraulic flow between pumps and actuators in automated machinery. It employs spool type 6 so the metering lands create the flow paths required for rapid cylinder shift. When the solenoids are de-energized, a spring-centered mechanism returns the spool to a neutral position that blocks pressure port P while connecting ports A and B to tank, preventing unintended motion during standby. Actuation is handled by wet armature solenoids that operate on 24 VDC, providing quiet operation and minimal leakage paths. Each coil is encapsulated to Class F standards and wound with Class H insulation to withstand elevated temperatures common in continuous service. Electrical input is limited to 30 W per coil, which simplifies power supply sizing and reduces panel heat.
In continuous duty applications the valve can remain energized indefinitely because the duty cycle is specified at 100 percent ED, and a water-resistant manual override lets maintenance staff shift the spool without electrical power during commissioning or fault recovery. The hydraulic gallery supports a rated flow of 40 L/min (10.5 US gpm) and tolerates pressures up to 350 bar on ports P, A, and B, while the tank port is limited to 210 bar, ensuring safe return flow to the reservoir. The double-solenoid assembly weighs 2.2 kg, allowing easy handling during manifold installation. Porting follows the ISO 4401-AB-03-4-A interface with the matching CETOP 3 (NFPA D03) pattern so the unit drops directly onto standard sub-plates without adapter blocks.
Technical Specifications
Center Condition
P Blocked, A&B To T
Coil Encapsulation
Class F
Coil Insulation
Class H
Coil Voltage
24 VDC
Duty Cycle
Continuous (ED 100%)
Manual Override
Water-Resistant
Mass
2.2 kg (Double Solenoid)
Max Pressure (p, A, B)
350 bar (5000 psi)
Max Tank Pressure (t)
210 bar (3000 psi)
Mounting Interface
ISO 4401-AB-03-4-A
Mounting Pattern
CETOP 3 (NFPA D03)
Power Consumption
30 W
Rated Flow
40 L/min (10.5 USgpm)
Solenoid Type
Wet Armature
Spool Type
6
Spool/spring Arrangement
Spring Centered
1620 Old Apex Road
Shipping & Payment Options
