Vickers | DG4V3S6CMFPA5WH560
DG4V3S6CMFPA5WH560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6CMFPA5WH560 is a directional valve produced by Vickers within the DG4 Directional Valves series and is intended to route hydraulic flow in automated machinery. It uses an ISO 4401-03 (CETOP 3) mounting interface so it can be installed on standard subplates in compact manifolds. The valve tolerates 350 bar (5000 psi) on ports p, a, and b, permitting use in high-pressure circuits. Petroleum oils are the recommended working fluid to maintain seal compatibility and service life. A 24 V DC coil energizes the solenoid, ensuring straightforward integration with common machine-control power supplies. Coil power is rated at 30 W, establishing the electrical load that must be provided by the drive circuitry. Continuous operation is possible because the duty cycle is 100 % ED, preventing the need for rest periods. A Class H insulation system protects the coil windings against the heat produced during extended energization. The enclosure meets IP67, which keeps dust out and allows temporary immersion without affecting performance.
Class F coil encapsulation surrounds the windings to improve thermal conductivity and mechanical stability. A flying lead coil type provides flexible wiring when space inside the machine frame is limited. The valve terminates through a 5-pin receptacle, simplifying plug-in electrical connection. A 1/2 in NPT conduit thread is available for protective cable glands in rugged environments. System monitoring fittings can be added using the 7/16-20 UNF gauge port thread. The design omits a manual override, so actuation is solely controlled by electrical signals. The mass is 5 lb, enabling single-hand mounting during assembly. Overall length is 8.66 in, allowing installation in tight hydraulic manifolds beside other valves.
Technical Specifications
Coil Encapsulation
Class F
Coil Insulation Class
Class H
Coil Power
30 W
Coil Type
Flying lead
Coil Voltage (dc)
24 V
Conduit Thread
1/2 in NPT
Duty Cycle
100% ED
Electrical Connector
5-pin receptacle
Fluid Compatibility
Petroleum oils
Gauge Port Thread
7/16-20 UNF
Ingress Protection
IP67
Manual Override
None
Mass
5 lb
Maximum Working Pressure (p,a,b)
350 bar (5000 psi)
Mounting Interface
ISO 4401-03 (CETOP 3)
Product Length
8.66 in
1620 Old Apex Road
Shipping & Payment Options
