Vickers | DG4V3S6BLMUB560
DG4V3S6BLMUB560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S6BLMUB560 valve belongs to the DG4 Directional Valves series from Vickers and is intended to route hydraulic fluid in automated circuits. It mounts to manifolds through the ISO 4401-AB-03-4-A interface so installation aligns with common subplates, and the port pattern follows CETOP 3 / NFPA D03 standards to match existing tooling. Flow paths are determined by a type 6 spool that blocks pressure port P while connecting A and B to tank, and the BL spring arrangement shifts the spool to center from the left-hand end for predictable fail-safe positioning. Actuation is provided by a single wet armature solenoid that minimizes wear by immersing the plunger in oil. The coil is wired through an ISO 4400 (DIN 43650) connector for quick replacement, and continuous ED 100 % duty permits the solenoid to remain energized without cooling intervals.
The valve passes up to 40 l/min (10.5 gpm) without exceeding rated losses, and working lines P, A, and B can be pressurized to 350 bar (5000 psi) while the tank port withstands 100 bar (1450 psi). An IP67 seal is achieved when the DIN plug is fitted, enabling operation in wash-down or outdoor enclosures. Electrical input may fall to 90 % of the rated voltage with no loss of function, so the unit tolerates modest supply fluctuations. Service weight is 1.6 kg in the single-solenoid configuration, allowing easy panel or manifold handling during maintenance.
Technical Specifications
Coil Connector
ISO 4400 (DIN 43650)
Duty Cycle
Continuous (ED 100%)
Ingress Protection
IP67 (with DIN plug)
Max Pressure (p/a/b Ports)
350 bar (5000 psi)
Max Tank Port Pressure
100 bar (1450 psi)
Maximum Flow
40 l/min (10.5 gpm)
Mounting Interface
ISO 4401-AB-03-4-A
Port Pattern
CETOP 3 / NFPA D03
Solenoid Configuration
Single
Solenoid Type
Wet Armature
Spool Function
Type 6 (P Blocked, A&B To T)
Spool/spring Arrangement
BL (Spring Offset To Center, Left-Hand)
Voltage Fluctuation Minimum
90% Rated
Weight
1.6 kg (single solenoid)
1620 Old Apex Road
Shipping & Payment Options
