Vickers | DG4V3S66CMFWB560
DG4V3S66CMFWB560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S66CMFWB560 valve is manufactured by Vickers within the DG4 Directional Valves series. Designed for hydraulic automation, it shifts flow paths with a solenoid-operated spool so actuators can extend or retract on command. The unit mounts on an ISO 4401-03 (CETOP 3) interface, allowing quick replacement on standard subplates. Its spring-centered spool returns to a neutral position that blocks port P while routing ports A and B to T, preventing pressure buildup when the solenoids are de-energized. During operation the valve tolerates working pressures up to 350 bar (5000 psi) on ports P, A, and B, and it passes up to 40 l/min (10.5 gpm) without exceeding rated limits. Continuous service is supported by a 100 % duty cycle, and the coils accept 110 VAC at 50 Hz or 120 VAC at 60 Hz while consuming 48 VA at 60 Hz, permitting direct connection to common industrial power systems.
The design also manages back-pressure conditions; the tank port can be pressurized to 210 bar (3000 psi) without compromising spool stability, which is beneficial in circuits that return flow through long or restricted lines. Petroleum oils are the specified working media, and service life is protected when fluid cleanliness is maintained at 19/17/14 or better to limit abrasive particles. Electrical hookup is handled through flying leads emerging from a 1/2 NPT entry, streamlining conduit installation, while a plain manual override allows manual shifting during commissioning or when control power is lost. Because the override is not detented, the spool re-centers automatically once force is removed, preserving the spring-centered behavior described earlier. The double-solenoid assembly weighs 2.2 kg, providing a compact form factor that keeps manifold stacks lightweight; this mass supports one-person installation and minimizes load on mobile equipment frames.
Technical Specifications
Actuation
Solenoid Operated
Center Condition
P Blocked, A & B To T
Coil Voltage (50 Hz)
110 VAC
Coil Voltage (60 Hz)
120 VAC
Duty Cycle
100% ED
Electrical Connection
Flying Leads (1/2 NPT)
Fluid Cleanliness
19/17/14
Fluid Compatibility
Petroleum Oils
Manual Override
Plain
Max Tank Port Pressure
210 bar (3000 psi)
Max Working Pressure (p,a,b)
350 bar (5000 psi)
Maximum Flow Rate
40 l/min (10.5 gpm)
Mounting Interface
ISO 4401-03 (CETOP 3)
Power Consumption (60 Hz)
48 VA
Spool/spring Arrangement
Spring Centered
Weight (double Solenoid)
2.2 kg
1620 Old Apex Road
Shipping & Payment Options
