Vickers | DG4V3S2CMFPA5WLH560
DG4V3S2CMFPA5WLH560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S2CMFPA5WLH560 valve belongs to the DG4 Directional Valves series and is manufactured by Vickers for use in hydraulic automation circuits where electrical signals shift fluid flow paths. A 24 VDC coil supplies the magnetic force required for actuation, while its 30 W power draw determines the size of the control power supply. The coil is supplied with flying leads so installers can route conductors directly to terminal blocks, and a 5-pin receptacle provides a plug-in point for removable harnesses. A 1/2 NPT wiring thread accepts standard conduit fittings that protect the leads in harsh environments. Because the relative duty factor is 100 %, the solenoids can remain continuously energized without overheating. The spring-centered dual-solenoid arrangement lets either coil shift the spool and then returns it to neutral when power is removed. Typical energize time is 60 ms at the stated flow and pressure, defining the reaction speed of controlled actuators.
The spool is a closed-center design, so all ports are blocked when neither solenoid is powered, preventing unintended cylinder or motor movement. A rated flow of 40 l/min establishes the maximum volume the valve can pass with acceptable pressure drop, and the P, A, and B ports can tolerate up to 350 bar, enabling operation in high-pressure systems. The T port is limited to 100 bar, setting the allowable back-pressure on the tank return line. Manifold attachment uses an ISO 4401-AB-03-4-A interface that matches the CETOP 3 (NFPA D03) mounting pattern, allowing drop-in replacement on common sub-plates. De-energize time is typically 40 ms, indicating how quickly flow ceases after the command is removed. The dual-solenoid assembly weighs 2.2 kg, a factor considered when sizing support brackets or evaluating vibration loads.
Technical Specifications
Coil Power Consumption
30 W
Coil Type
Flying Leads (F)
Coil Voltage
24 VDC (H)
Electrical Connector
5-Pin Receptacle (PA5)
Mounting Interface
ISO 4401-AB-03-4-A
Mounting Pattern
CETOP 3 (NFPA D03)
P, A, B Port Max Pressure
350 bar (5000 psi)
Rated Flow
40 l/min (10.5 USgpm)
Relative Duty Factor
100% (ED=100%)
Spool Arrangement
Spring Centered, Dual Solenoid
Spool Type
Closed Center (All Ports)
T Port Max Pressure
100 bar (1450 psi)
Typical De-energize Response
40 ms (2C spool, 20 l/min, 175 bar)
Typical Energize Response
60 ms (2C spool, 20 l/min, 175 bar)
Weight
2.2 kg (Dual Solenoid)
Wiring Thread
1/2 NPT (W)
1620 Old Apex Road
Shipping & Payment Options
