Vickers | DG4V3S2AMFPA5WLB560P08
DG4V3S2AMFPA5WLB560P08
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S2AMFPA5WLB560P08 valve is produced by Vickers within the DG4 Directional Valves series for controlling hydraulic flow paths in automated circuits. Its closed center spool blocks all ports in the neutral position so actuators remain fixed when the solenoid is not energized. A spring offset arrangement returns the spool to this neutral position automatically, enabling fail-safe centering after each actuation. The solenoid coil is rated at 30 W, providing the electromagnetic force necessary to shift the spool without excessive heat rise. Class H insulation on the coil withstands high winding temperatures to maintain reliability during extended use. A 100 % duty cycle allows continuous energization, supporting applications that require prolonged directional control. The valve uses a 5-pin connector for electrical termination, ensuring quick plug-in wiring and consistent contact integrity. A plain manual override permits mechanical shifting during maintenance or power loss.
The hydraulic end permits a maximum flow of 40 l/min so circuits can operate medium-sized cylinders and motors without undue pressure drop. Ports P, A, and B tolerate up to 350 bar, enabling high-pressure work lines, while the T port is limited to 100 bar for safe return routing. A 0.8 mm orifice in port P provides metering that stabilizes pilot flow at start-up. The mounting face follows ISO 4401-AB-03-4-A, allowing interchange with standard subplates and manifolds. Petroleum-based hydraulic oils are specified for fluid compatibility to protect seals and maintain switching response. Operation requires oil cleanliness no worse than ISO 4406 19/17/14 to reduce wear on spool lands. The housing length of 5.750 in and width of 1.800 in permit installation in compact valve banks.
Technical Specifications
Coil Insulation Class
Class H
Coil Power
30 W
Duty Cycle
100% ED
Electrical Connection
5-Pin Connector
Fluid Cleanliness
ISO 4406 19/17/14
Fluid Compatibility
Petroleum Oils
Manual Override
Plain
Max Flow
40 l/min
Mounting Interface
ISO 4401-AB-03-4-A
P, A, B Max Pressure
350 bar
Port Orifice P
0.8 mm
Product Length
5.750 in
Product Width
1.800 in
Spool Type
Closed Center (All Ports)
Spool/spring Arrangement
Spring Offset
T Port Max Pressure
100 bar
1620 Old Apex Road
Shipping & Payment Options
