DG4V3S1CMFWB560

The DG4V3S1CMFWB560 valve belongs to the DG4 Directional Valves series from Vickers and is used to shift hydraulic flow paths in automated machinery. A gray iron body supplies the structural strength needed for cyclical high-pressure service, while D03 size dimensions allow direct mounting on standard subplates without additional adapters. The ISO 4401-03 interface keeps port patterns consistent across manifold layouts to simplify replacement. A rated pressure of 350 bar defines the maximum system pressure the spool can withstand, and a nominal flow of 80 l/min states the volume it can pass at that rating. The working temperature range from ‑20 °C to 70 °C lets the unit operate in cold starts as well as elevated ambient conditions common near power units.

Buna-N seals isolate the flow passages and are chosen for compatibility with common petroleum-based fluids. The tank port is limited to 100 bar so return lines must be sized accordingly to avoid back-pressure. A flying-lead coil simplifies electrical connection in tight enclosures, and its 30 W wattage sets the continuous power draw for the solenoid circuit. The wiring housing provides a 1/2 NPT thread, giving installers a familiar conduit entry for strain relief and environmental protection. Each of these features aligns the DG4V3S1CMFWB560 with mobile and industrial applications that require reliable directional control under moderate electrical loads and defined fluid limits.