Vickers | DG4V3S0AMFWB560
DG4V3S0AMFWB560
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S0AMFWB560 valve belongs to the DG4 Directional Valves series manufactured by Vickers for controlling actuator flow paths in hydraulic automation. Its body is cast from gray iron, giving the housing the stiffness needed for demanding mobile and industrial circuits. The unit tolerates working pressures up to 350 bar so it can be placed in high-pressure supply lines without derating. A flow capacity of 80 l/min lets pumps deliver adequate volume to connected cylinders while keeping velocity within recommended limits. It is specified for petroleum oils, and the required fluid cleanliness of ISO 4406 19/17/14 limits abrasive particles that could score the spool. Electrical actuation uses a coil housed in a 1/2 in NPT conduit box, allowing straightforward conduit or cable gland entry. Buna-N seals isolate the internal galleries from the environment, and because there is no manual override, all spool shifts occur solely through the energized solenoid.
The valve attaches to subplates that follow the ISO 4401-03 pattern, making it interchangeable with other directional controls that share this interface. Fastening screws are specified as M5-0.8 or 10-24 UNC, offering metric or inch hardware options during installation. Correct sealing depends on a mounting surface flatness of 0.013 mm, preventing cross-port leakage when torque is applied. A 7/16-20 UNF (SAE) gauge port lets technicians connect pressure transducers for diagnostic checks without adding adapters. Overall dimensions are 5.75 in in length, 1.8 in in width, and 3.57 in in height, providing a compact envelope for stacked manifold layouts. The assembled unit weighs 3.5 lb, light enough to be installed or removed without lifting aids.
Technical Specifications
Body Material
Gray Iron
Coil Type
1/2 in NPT conduit box
Flow Capacity
80 l/min
Fluid Cleanliness
ISO 4406 19/17/14
Fluid Compatibility
Petroleum Oils
Gauge Port Thread
7/16-20 UNF (SAE)
Height
3.57 in
Length
5.75 in
Manual Override
None
Mounting Bolt Thread
M5-0.8 (10-24 UNC)
Mounting Interface
ISO 4401-03
Mounting Surface Flatness
0.013 mm
Pressure Rating
350 bar
Seal Material
Buna-N
Weight
3.5 lb
Width
1.8 in
1620 Old Apex Road
Shipping & Payment Options
