Vickers | DG4V3S0AMFPM4WLH560EN654
DG4V3S0AMFPM4WLH560EN654
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V3S0AMFPM4WLH560EN654 directional control valve is part of the DG4 Directional Valves series from Vickers and is used to shift hydraulic flow paths in automated machinery. An open‑center spool designated as type 0 vents pump flow to tank when neither solenoid is energized, limiting heat generation in standby mode. The A spring offset arrangement returns the spool to a defined home position once power is removed, supporting fail‑safe circuit design. A DC wet armature solenoid provides smooth movement because the moving parts are lubricated by system fluid. The coil is wound for 24 VDC operation so it ties directly to common PLC power rails, and reliable actuation is maintained as long as the supply remains at least 90 percent of the rated voltage. Class H insulation withstands elevated winding temperature that arises during continuous 100 percent duty cycle service, while the 30 W coil rating helps designers size the electrical supply correctly.
Installation details focus on wiring and interface. A flying-lead coil simplifies electrical connection when space limits access to terminal boxes, and the 1/2 inch NPT thread accepts standard conduit to protect those leads from abrasion. A plain manual override located at the solenoid end lets maintenance staff shift the spool without power during commissioning or troubleshooting. Hydraulic capabilities include a maximum flow of 40 liters per minute and allowable line pressure of 350 bar on ports P, A, and B, enabling use in high-pressure circuits, while the tank port may see up to 100 bar backpressure. The ISO 4401-03 (CETOP 3) mounting pattern allows direct sub-plate installation and interchange with other valves following the same standard. Together these characteristics match mid-size actuators that demand reliable flow direction under continuous cycling.
Technical Specifications
Coil Insulation
Class H
Coil Power
30 W
Coil Type
Flying Lead (F)
Coil Voltage
24 VDC (H)
Duty Cycle
100% ED
Manual Override
Plain (Solenoid End Only)
Max Flow Rating
40 l/min
Max Operating Pressure (p,a,b)
350 bar (5000 psi)
Max Tank Port Pressure
100 bar (1450 psi)
Minimum Supply Voltage
90% rated
Mounting Interface
ISO 4401-03 (CETOP 3)
Solenoid Type
DC Wet Armature
Spool Type
0 (Open Center)
Spring Arrangement
A (Spring Offset)
Wiring Thread
1/2 in NPT (W)
1620 Old Apex Road
Shipping & Payment Options
