Vickers | DG4V37BMFTWLD7H760
DG4V37BMFTWLD7H760
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V37BMFTWLD7H760 is a directional control valve manufactured by Vickers within the DG4 Directional Valves series. It directs oil flow in hydraulic automation circuits that require reliable on-off actuation under continuous duty. A wet armature solenoid drives the valve, and its coil operates on 24 VDC while drawing 30 W. The winding insulation is rated Class H, and the external encapsulation meets Class F, enabling operation at elevated coil temperatures. Electrical connection is provided through flying leads identified as Type F, simplifying harness integration. The design supports a relative duty factor of 100 % ED so the coil can remain energized without a rest period. Internal sealing is protected against dust and water to IP67, allowing installation in exposed machine areas. Flow paths follow Spool Type 7, which ports pressure to A and B while keeping T blocked, and the B spring arrangement returns the spool to center from an end position by means of a single offset spring.
The hydraulic section withstands 350 bar (5000 psi) on the P, A, and B ports, and the tank line is permitted up to 210 bar (3000 psi). System cleanliness must meet ISO 19/17/14 or better to prevent spool sticking and premature wear. Mounting follows the ISO 4401-AB-03-4-A interface, matching subplates built to CETOP 3 or NFPA D03 standards for interchangeability across equipment. Fastening is accomplished with four M5-0.8 or 10-24 UNC bolts that pass through the body into the subplate. These mechanical and hydraulic limits define the valve’s role in medium-pressure manifolds and mobile machinery where compact CETOP 3 cavities are common. The standardized interface also simplifies service because replacement units share the same gasket pattern and bolt circle. Together, the pressure ratings, filtration requirement, and mounting geometry ensure that the DG4V37BMFTWLD7H760 integrates safely into closed-loop or open-center circuits while maintaining consistent response under full load.
Technical Specifications
Coil Encapsulation
Class F
Coil Insulation Class
Class H
Coil Lead Type
Flying Leads (Type F)
Coil Voltage
24 VDC
Filtration Requirements
ISO 19/17/14
Max Pressure (p,a,b)
350 bar (5000 psi)
Max Tank Line Pressure
210 bar (3000 psi)
Mounting Bolt Thread
M5-0.8 (10-24 UNC)
Mounting Interface
ISO 4401-AB-03-4-A
Mounting Standard
CETOP 3 / NFPA D03
Power Consumption
30 W
Protection Rating
IP67
Relative Duty Factor
100% ED
Solenoid Type
Wet Armature
Spool Type
7 (P to A & B, T Blocked)
Spool/spring Arrangement
B (Spring Offset End-To-Center)
1620 Old Apex Road
Shipping & Payment Options
