Vickers | DG4V36NVMUH760
DG4V36NVMUH760
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V36NVMUH760 valve is manufactured by Vickers as part of the DG4 Directional Valves series and is installed to route hydraulic flow in automated machinery. It employs spool type 6, which blocks port P while connecting ports A and B to T when de-energized to unload the circuit. The mounting interface follows ISO 4401-AB-03-4-A, allowing direct installation on standard subplates. Maximum pressure at the P, A, and B ports is 350 bar, and the tank port is rated for 210 bar, so the unit supports high-pressure supply lines and controlled return flow. A wet armature solenoid identified as V at the A end shifts the spool whenever a 24 V DC signal is present, and the coil draws 30 W, making power budgeting straightforward.
Class F coil encapsulation shields the winding, while class H insulation lets the coil tolerate higher operating temperatures without damage. The duty cycle is 100 percent, allowing continuous energization, and the spool reaches its command position within 60 ms to give fast response in closed-loop controls. Electrical hookup uses an ISO 4400 (DIN 43650) connector, and the housing carries an IP67 rating to resist dust and water during field service. A plain manual override lets technicians shift the spool by hand for setup or emergency operation. The double-solenoid configuration weighs 2.2 kg, so panel supports must accommodate that load.
Technical Specifications
Coil Encapsulation
Class F
Coil Insulation Class
H
Duty Cycle
100% ED
Electrical Connection
ISO 4400 (DIN 43650)
Energizing Time (dc)
60 ms
Ingress Protection
IP67
Manual Override
Plain
Max Pressure (p,a,b)
350 bar
Mounting Interface
ISO 4401-AB-03-4-A
Power Consumption
30 W
Rated Voltage
24 VDC
Solenoid Identity
V (A at A end)
Solenoid Type
Wet Armature
Spool Type
6 (P blocked, A&B to T)
Tank Port Pressure (t)
210 bar
Weight (double Solenoid)
2.2 kg
1620 Old Apex Road
Shipping & Payment Options
