DG4V36CMFPM4WLD7H760EN654

The DG4V36CMFPM4WLD7H760EN654 directional valve is manufactured by Vickers as part of the DG4 Directional Valves series. It controls hydraulic actuation by shifting a spool to direct flow paths. The coil voltage is 24 VDC, matching common mobile and industrial power supplies. A 4-pin connector provides the electrical connection for quick mating with system wiring. Power consumption is 30 W, which defines the electrical load drawn when the solenoid is energized. There is an indicator light to show coil energization, aiding troubleshooting. The valve includes a plain manual override so the spool can be shifted mechanically if power is unavailable. It uses a single stage construction, minimizing response delay and simplifying maintenance. Spool type 6 is selected to create the specific porting pattern demanded by standard actuator circuits. A spring centered arrangement returns the spool to neutral once the coil is de-energized, ensuring the actuators stop safely.

The valve mounts on an ISO 4401-03 interface, allowing interchangeability with other components sharing the same subplate pattern. Its rated flow is 80 L/min, setting the maximum volume it can pass without exceeding pressure loss limits. Maximum working pressure at ports P, A, and B is 350 bar, defining the highest continuous pressure it can withstand during operation, while the tank port rating is 210 bar to protect the return circuit. Petroleum oils are specified as the compatible fluid, so no water-glycol or synthetic blends should be introduced. A cleanliness code of 19/17/14 establishes the required particle count level to prevent spool binding and wear. The unit’s height is 3.570 in and its length is 8.660 in, dimensions that assist in assessing space requirements inside manifolds or power units. Together these characteristics confirm suitability for medium-flow, high-pressure hydraulic systems that demand compact installation.