DG4V36CMFPAWB560

The DG4V36CMFPAWB560 directional valve is produced by Vickers within the DG4 Directional Valves series for automated hydraulic circuits. It controls oil flow by shifting a spring centered spool, directing actuators to stop or move. The valve employs a plug-in F coil, enabling rapid replacement without dismantling the solenoid tube. An Instaplug male receptacle serves as the electrical connector so field wiring can be completed quickly. The wiring housing is tapped with a 1/2 NPT thread, allowing standard conduit fittings to seal the enclosure. Installation follows the ISO 4401-03 CETOP 3 mounting interface, and alignment to manifolds also matches the NFPA D03 port pattern, helping designers maintain a uniform footprint across multiple valve stations.

Flow paths are defined by a number 6 spool that blocks the pressure port while connecting both work ports to tank when de-energized, preventing unintended actuator motion during power loss. A spring centered arrangement returns the spool to this neutral position automatically once the coil is de-energized. The pressure envelope supports 350 bar (5075 psi) at the P, A, and B ports, letting the valve operate in high-pressure circuits without external relief devices. The tank port is limited to 207 bar (3000 psi), guiding designers to size return lines accordingly. By combining these pressure limits with the spool geometry, the DG4V36CMFPAWB560 provides predictable load holding and rapid exhaust characteristics suited to industrial presses, machine tools, and material-handling systems.