Vickers | DG4V36CHMU1C660EN38
DG4V36CHMU1C660EN38
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V36CHMU1C660EN38 valve is produced by Vickers and belongs to the DG4 Directional Valves series. It directs hydraulic flow in automated machinery, enabling precise actuator movement in response to electrical signals. The unit is built as a single stage device so flow changes occur directly in the main spool without a pilot stage. Spool type 6 defines the metering geometry that determines transition rates between flow paths. A spring centered arrangement returns the spool to neutral when power is removed, restoring blocked or centered port conditions. The valve mounts on an ISO 4401-03 interface, allowing quick replacement on standard subplates. During operation it tolerates a working pressure up to 350 bar, permitting use on high-pressure circuits, while maximum flow of 80 L/min keeps pressure drop within acceptable limits. The solenoid is wound for 220 VAC 50 Hz, matching industrial mains supplies, and it draws 54 VA so panel designers can size power feeds accordingly.
For control wiring, the valve uses an ISO 4400 electrical connector, which simplifies plug-in assembly and maintenance. An IP67 protection rating seals the enclosure against dust ingress and temporary immersion, supporting installation in wash-down areas. A waterproof manual override lets technicians shift the spool manually during commissioning or in case of power loss. Compatibility with petroleum oils makes the valve suitable for common mineral-based hydraulic fluids, and the required cleanliness level of 19/17/14 ensures the spool does not stick due to contamination. The tank port can accept back-pressures up to 210 bar, so return-line restrictions do not impair performance. Physical dimensions measure 199.898 mm in length and 45.720 mm in width, factors that guide manifold layout and clearance planning within tight machine frames.
Technical Specifications
Coil Voltage
220 VAC 50 Hz
Electrical Connection
ISO 4400
Fluid Cleanliness
19/17/14
Fluid Compatibility
Petroleum Oils
Length
199.898 mm
Manual Override
Waterproof
Max Flow
80 L/min
Max Working Pressure
350 bar
Mounting Interface
ISO 4401-03
Power Consumption
54 VA
Protection
IP67
Spool Type
6
Spring Arrangement
Spring Centered
Stage
Single Stage
Tank Port Max Pressure
210 bar
Width
45.720 mm
1620 Old Apex Road
Shipping & Payment Options
