Vickers | DG4V36AMFWB660
DG4V36AMFWB660
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V36AMFWB660 directional valve is produced by Vickers for the DG4 Directional Valves series and directs hydraulic oil where required in automated systems. It is solenoid operated, so an electrical signal moves the spool rather than pilot pressure. A coil rated at 110 VAC when supplied from a 50 Hz network or 120 VAC on 60 Hz power lets the same unit work in different regions. Electrical demand reaches 61 VA at 50 Hz and 58 VA at 60 Hz, figures used for sizing the control circuit. A spring offset identified as code A automatically returns the spool to its rest position after de-energization, while a plain manual override allows technicians to shift the valve during commissioning or a loss of power. Spool code 6 blocks port P and routes ports A and B to T in the neutral state, preventing unintended actuator movement. Mounting follows the ISO 4401-03 interface, and the solenoid housing provides a flying lead through a 1/2-inch NPT conduit entry to simplify field wiring.
The valve sustains flows up to 80 L/min and withstands a maximum operating pressure of 350 bar, giving it the capacity for mid-range hydraulic circuits in presses, machine tools, or mobile equipment. Petroleum oils are the specified fluid, and reliable operation depends on maintaining a cleanliness class of 19/17/14 to limit wear on the precision-ground spool lands. Overall length is 146.050 mm and width is 45.720 mm, so the body fits compact manifold stations without exceeding common stack dimensions. These dimensional, hydraulic, and fluid-quality limits define installation space, filtration requirements, and system pressure boundaries, allowing designers to match the DG4V36AMFWB660 accurately to the demands of automated motion control.
Technical Specifications
Actuation Type
Solenoid Operated
Coil Voltage (50 Hz)
110 VAC
Coil Voltage (60 Hz)
120 VAC
Electrical Connection
Flying Lead 1/2 in NPT Housing
Flow Rating
80 L/min
Fluid Cleanliness Class
19/17/14
Fluid Compatibility
Petroleum Oils
Interface
ISO 4401-03
Length
146.050 mm
Manual Override
Plain
Max Operating Pressure
350 bar
Power Consumption (50 Hz)
61 VA
Power Consumption (60 Hz)
58 VA
Spool Type
6 (P blocked, A & B to T)
Spring Arrangement
A (Spring Offset)
Width
45.720 mm
1620 Old Apex Road
Shipping & Payment Options
