Vickers | DG4V36ALMFWB660
DG4V36ALMFWB660
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V36ALMFWB660 directional valve is part of the DG4 Directional Valves series and is produced by Vickers for hydraulic automation circuits. This solenoid-operated model shifts flow paths electrically, supporting remote control in machine systems. The solenoid requires a 120 VAC coil at 60 Hz and draws 58 VA, so cabinet wiring and power supply sizing are predictable. A flying lead outlet with a 1/2 in NPT thread provides straightforward electrical connection while sealing against oil mist. There is no indicator light, so status feedback must be provided by external sensors if needed. A plain manual override lets technicians reposition the spool during commissioning or power loss without special tools. The unit mounts on an ISO 4401-03 interface, allowing interchange with common subplates. Internally, a spring offset assembly built in a left-hand configuration returns the spool to its rest position when the coil is de-energized.
The valve center condition blocks port P and routes ports A and B to T, enabling pump unloading during standby while relieving actuator lines. Rated flow capacity reaches 21.0 GPM (80.0 L/min), so it suits medium-duty circuits that demand steady motion. The design tolerates operating pressures up to 350 bar, matching typical industrial power units. It is intended for use with petroleum-based oils, and a cleanliness level of 19/17/14 is required to prevent spool binding. Viton seals resist degradation from these fluids and from elevated system temperatures. Overall length is 5.750 in (146.050 mm) and width is 1.800 in (45.720 mm), which helps planners fit the valve into compact manifolds. These dimensional, flow, and material features complete the functional profile of the DG4V36ALMFWB660 for automated hydraulic equipment.
Technical Specifications
Actuation Type
Solenoid Operated
Center Condition
P Blocked, A & B To T
Coil Voltage (60 Hz)
120 VAC
Electrical Connection
Flying Lead 1/2 in NPT
Fluid Cleanliness
19/17/14
Fluid Compatibility
Petroleum Oils
Indicator Light
No
Manual Override
Plain
Max Flow
21.0 GPM (80.0 L/min)
Max Operating Pressure
350 bar
Mounting Interface
ISO 4401-03
Power Consumption (60 Hz)
58 VA
Product Length
5.750 in (146.050 mm)
Product Width
1.800 in (45.720 mm)
Seal Material
Viton
Spool/spring Arrangement
Spring Offset (Left-Hand Build)
1620 Old Apex Road
Shipping & Payment Options
