Vickers | DG4V333CVMUH760
DG4V333CVMUH760
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DG4V333CVMUH760 directional valve is produced by Vickers within the DG4 Directional Valves series and serves to route hydraulic flow in automated equipment. It features a spool type 33 that closes the center ports while bleeding the A and B lines to tank when in neutral, allowing pressure relief during standby. A spring-centered arrangement returns the spool to neutral after coil de-energization, maintaining circuit safety. The actuator is a DC solenoid rated for 24 VDC, integrating easily with standard control power. Electrical load is limited to 30 W, and a 100 % duty cycle permits continuous energization without thermal derating. System response is defined by a 60 ms energizing time and a 40 ms de-energizing time, enabling precise timing in high-cycle sequences. The valve mounts on an ISO 4401-AB-03-4-A interface so it aligns directly with compatible subplates.
Wiring is completed through an ISO 4400 (DIN 43650) connector that provides quick disconnection for maintenance. The enclosure carries an IP67 rating, protecting the coil and leads against dust ingress and short-term immersion. Port geometry follows the CETOP 3 / NFPA D03 pattern, ensuring interchangeability across manifold blocks. Operating pressure capability reaches 350 bar (5000 psi) on the pressure and work ports, while the tank port tolerates 210 bar (3000 psi), allowing use in high-pressure circuits. Acceptable fluid cleanliness is classified as 19/17/14, signaling the filtration level needed to minimize wear. The assembly weighs 2.2 kg, which supports manual installation on machinery without lifting equipment. Together, these characteristics outline a compact valve ready for repetitive, high-pressure service in industrial hydraulic systems.
Technical Specifications
Duty Cycle
100% ED
Electrical Connection
ISO 4400 (DIN 43650)
Fluid Cleanliness
19/17/14
Ingress Protection
IP67
Max Pressure (p,a,b)
350 bar (5000 psi)
Max Tank Pressure (t)
210 bar (3000 psi)
Mounting Interface
ISO 4401-AB-03-4-A
Port Pattern
CETOP 3 / NFPA D03
Power Consumption
30 W
Rated Voltage
24 VDC
Response Time De-energize
40 ms
Response Time Energize
60 ms
Solenoid Type
DC
Spool Type
33 (Closed Center, Bleed A&B to T)
Spring Arrangement
Spring Centered (C)
Weight
2.2 kg
1620 Old Apex Road
Shipping & Payment Options
